Disble termlist term factor by default

[pazpar2-moved-to-github.git] / doc / book.xml

<?xml version="1.0" standalone="no"?>
<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.4//EN"
    "http://www.oasis-open.org/docbook/xml/4.4/docbookx.dtd" 
[
     <!ENTITY % local SYSTEM "local.ent">
     %local;
     <!ENTITY % entities SYSTEM "entities.ent">
     %entities;
     <!ENTITY % idcommon SYSTEM "common/common.ent">
     %idcommon;
]>
<book id="book">
 <bookinfo>
  <title>Pazpar2 - User's Guide and Reference</title>
  <author>
   <firstname>Sebastian</firstname><surname>Hammer</surname>
  </author>
  <author>
   <firstname>Adam</firstname><surname>Dickmeiss</surname>
  </author>
  <author>
   <firstname>Marc</firstname><surname>Cromme</surname>
  </author>
  <author>
   <firstname>Jakub</firstname><surname>Skoczen</surname>
  </author>
  <author>
   <firstname>Mike</firstname><surname>Taylor</surname>
  </author>
  <author>
   <firstname>Dennis</firstname><surname>Schafroth</surname>
  </author>
  <releaseinfo>&version;</releaseinfo>
  <copyright>
   <year>&copyright-year;</year>
   <holder>Index Data</holder>
  </copyright>
  <abstract>
   <simpara>
    Pazpar2 is a high-performance metasearch engine featuring
    merging, relevance ranking, record sorting,
    and faceted results.
    It is middleware: it has no user interface of its own, but can be
    configured and controlled by an XML-over-HTTP web-service to provide
    metasearching functionality behind any user interface.
   </simpara>
   <simpara>
    This document is a guide and reference to Pazpar2 version &version;.
   </simpara>
   <simpara>
    <inlinemediaobject>
     <imageobject>
      <imagedata fileref="common/id.png" format="PNG"/>
   </imageobject>
    <imageobject>
     <imagedata fileref="common/id.eps" format="EPS"/>
   </imageobject>
   </inlinemediaobject>
   </simpara>
  </abstract>
 </bookinfo>
 
 <chapter id="introduction">
  <title>Introduction</title>

  <section id="what.pazpar2.is">
  <title>What Pazpar2 is</title>
  <para>
   Pazpar2 is a stand-alone metasearch engine with a web-service API, designed
   to be used either from a browser-based client (JavaScript, Flash,
   Java applet,
   etc.), from server-side code, or any combination of the two.
   Pazpar2 is a highly optimized client designed to
   search many resources in parallel. It implements record merging,
   relevance-ranking and sorting by arbitrary data content, and facet
   analysis for browsing purposes. It is designed to be data-model
   independent, and is capable of working with MARC, DublinCore, or any
   other <ulink url="&url.xml;">XML</ulink>-structured response format
   -- <ulink url="&url.xslt;">XSLT</ulink> is used to normalize and extract
   data from retrieval records for display and analysis. It can be used
   against any server which supports the 
   <ulink url="&url.z39.50;">Z39.50</ulink>, <ulink url="&url.sru;">SRU/SRW</ulink> 
   or <ulink url="&url.solr;">SOLR</ulink> protocol. Proprietary
   backend modules can function as connectors between these standard
   protocols and any non-standard API, including web-site scraping, to
   support a large number of other protocols.
  </para>
  <para>
   Additional functionality such as
   user management and attractive displays are expected to be implemented by
   applications that use Pazpar2. Pazpar2 itself is user-interface independent.
   Its functionality is exposed through a simple XML-based web-service API,
   designed to be easy to use from an Ajax-enabled browser, Flash
   animation, Java applet, etc., or from a higher-level server-side language
   like PHP, Perl or Java. Because session information can be shared between
   browser-based logic and server-side scripting, there is tremendous
   flexibility in how you implement application-specific logic on top
   of Pazpar2.
  </para>
  <para>
   Once you launch a search in Pazpar2, the operation continues behind the
   scenes. Pazpar2 connects to servers, carries out searches, and
   retrieves, deduplicates, and stores results internally. Your application
   code may periodically inquire about the status of an ongoing operation,
   and ask to see records or result set facets. Results become
   available immediately, and it is easy to build end-user interfaces than
   feel extremely responsive, even when searching more than 100 servers
   concurrently.
  </para>
  <para>
   Pazpar2 is designed to be highly configurable. Incoming records are
   normalized to XML/UTF-8, and then further normalized using XSLT to a
   simple internal representation that is suitable for analysis. By
   providing XSLT stylesheets for different kinds of result records, you
   can configure Pazpar2 to work against different kinds of information
   retrieval servers. Finally, metadata is extracted in a configurable
   way from this internal record, to support display, merging, ranking,
   result set facets, and sorting. Pazpar2 is not bound to a specific model
   of metadata, such as DublinCore or MARC: by providing the right
   configuration, it can work with any combination of different kinds of data in
   support of many different applications.
  </para>
  <para>
   Pazpar2 is designed to be efficient and scalable. You can set it up to
   search several hundred targets in parallel, or you can use it to support
   hundreds of concurrent users. It is implemented with the same attention
   to performance and economy that we use in our indexing engines, so that
   you can focus on building your application without worrying about the
   details of metasearch logic. You can devote all of your attention to
   usability and let Pazpar2 do what it does best -- metasearch.
  </para>
  <para>
   Pazpar2 is our attempt to re-think the traditional paradigms for
   implementing and deploying metasearch logic, with an uncompromising
   approach to performance, and attempting to make maximum use of the
   capabilities of modern browsers. The demo user interface that
   accompanies the distribution is but one example. If you think of new
   ways of using Pazpar2, we hope you'll share them with us, and if we
   can provide assistance with regards to training, design, programming,
   integration with different backends, hosting, or support, please don't
   hesitate to contact us. If you'd like to see functionality in Pazpar2
   that is not there today, please don't hesitate to contact us. It may
   already be in our development pipeline, or there might be a
   possibility for you to help out by sponsoring development time or
   code. Either way, get in touch and we will give you straight answers.
  </para>
  <para>
   Enjoy!
  </para>
  <para>
   Pazpar2 is covered by the GNU General Public License (GPL) version 2.
   See <xref linkend="license"/> for further information.
  </para>
  </section>

  <section id="connectors">
  <title>Connectors to non-standard databases</title>
  <para>
   If you wish to connect to commercial or other databases which do not
   support open standards, please contact Index Data on
   <email>info@indexdata.com</email>. We have a
   proprietary framework for building connectors that enable Pazpar2
   to access
   thousands of online databases, in addition to the vast number of catalogs
   and online services that support the Z39.50/SRU/SRW/SOLR protocols.
  </para>
  </section>

  <section id="name">
   <title>A note on the name Pazpar2</title>
   <para>
    The name Pazpar2 derives from three sources.  One one hand, it is
    Index Data's second major piece of software that does parallel
    searching of Z39.50 targets.  On the other, it is a near-homophone
    of Passpartout, the ever-helpful servant in Jules Verne's novel
    Around the World in Eighty Days (who helpfully uses the language
    of his master).  Finally, "passe par tout" means something like
    "passes through anything" in French -- on other words, a universal
    solution, or if you like a MasterKey.
   </para>
  </section>
 </chapter>

 <chapter id="installation">
  <title>Installation</title>
  <para>
   The Pazpar2 package includes documentation as well
   as the Pazpar2 server. The package also includes a simple user
   interface called "test1", which consists of a single HTML page and a single
   JavaScript file to illustrate the use of Pazpar2.
  </para>
  <para>
   Pazpar2 depends on the following tools/libraries:
   <variablelist>
    <varlistentry><term><ulink url="&url.yaz;">YAZ</ulink></term>
     <listitem>
      <para>
       The popular Z39.50 toolkit for the C language.
       YAZ <emphasis>must</emphasis> be compiled with Libxml2/Libxslt support.
      </para>
     </listitem>
    </varlistentry>
    <varlistentry><term><ulink url="&url.icu;">International
       Components for Unicode (ICU)</ulink></term>
     <listitem>
      <para>
       ICU provides Unicode support for non-English languages with
       character sets outside the range of 7bit ASCII, like
       Greek, Russian, German and French. Pazpar2 uses the ICU
       Unicode character conversions, Unicode normalization, case
       folding and other fundamental operations needed in
       tokenization, normalization and ranking of records. 
      </para>
      <para>
       Compiling, linking, and usage of the ICU libraries is optional,
       but strongly recommended for usage in an international
       environment.  
      </para>
     </listitem>
    </varlistentry>
   </variablelist>
  </para>
  <para>
   In order to compile Pazpar2, a C compiler which supports C99 or later
   is required.
  </para>

  <section id="installation.unix">
   <title>Installation from source on Unix (including Linux, MacOS, etc.)</title>
   <para>
    The latest source code for Pazpar2 is available from
    <ulink url="&url.pazpar2.download;"/>.
    Most Unix-based operating systems have the required
    tools available as binary packages.
    For example, if Libxml2/libXSLT libraries
    are already installed as development packages, use these.
   </para>
   
   <para>
    Ensure that the development libraries and header files are
    available on your system before compiling Pazpar2. For installation
    of YAZ, refer to the Installation chapter of the YAZ manual at
    <ulink url="&url.yaz.install;"/>.
   </para>
   <para>
    Once the dependencies are in place, Pazpar2 can be unpacked and
    installed as follows:
   </para>
   <screen>
    tar xzf pazpar2-VERSION.tar.gz
    cd pazpar2-VERSION
    ./configure
    make
    sudo make install
   </screen>
   <para>
    The <literal>make install</literal> will install manpages as well as the
    Pazpar2 server, <literal>pazpar2</literal>, 
    in PREFIX<literal>/sbin</literal>.
    By default, PREFIX is <literal>/usr/local/</literal> . This can be
    changed with configure option <option>--prefix</option>.
   </para>
  </section>

  <section id="installation.win32">
    <title>Installation from source on Windows</title>
    <para>
      Pazpar2 can be built for Windows using
      <ulink url="&url.vstudio;">Microsoft Visual Studio</ulink>.
      The support files for building YAZ on Windows are located in the
      <filename>win</filename> directory. The compilation is performed
      using the <filename>win/makefile</filename> which is to be
      processed by the NMAKE utility part of Visual Studio.
    </para>
    <para>
      Ensure that the development libraries and header files are
      available on your system before compiling Pazpar2. For installation
      of YAZ, refer to
      the Installation chapter of the YAZ manual at
      <ulink url="&url.yaz.install;"/>.
      It is easiest if YAZ and Pazpar2 are unpacked in the same
      directory (side-by-side).
    </para>
    <para>
      The compilation is tuned by editing the makefile of Pazpar2.
      The process is similar to YAZ. Adjust the various directories
      <literal>YAZ_DIR</literal>, <literal>ZLIB_DIR</literal>, etc.,
      as required.
    </para>
    <para>
      Compile Pazpar2 by invoking <application>nmake</application> in
      the <filename>win</filename> directory.
      The resulting binaries of the build process are located in the
      <filename>bin</filename> of the Pazpar2 source
      tree - including the <filename>pazpar2.exe</filename> and necessary DLLs.
    </para>
    <para>
      The Windows version of Pazpar2 is a console application. It may
      be installed as a Windows Service by adding option 
      <literal>-install</literal> for the pazpar2 program. This will
      register Pazpar2 as a service and use the other options provided
      in the same invocation. For example:
      <screen>
        cd \MyPazpar2\etc
        ..\bin\pazpar2 -install -f pazpar2.cfg -l pazpar2.log
      </screen>
      The Pazpar2 service may now be controlled via the Service Control
      Panel. It may be unregistered by passing the <literal>-remove</literal>
      option. Example:
      <screen>
        cd \MyPazpar2\etc
        ..\bin\pazpar2 -remove
      </screen>
    </para>
  </section>

  <section id="installation.test1">
   <title>Installation of test interfaces</title>
   <para>
    In this section we show how to make available the set of simple
    interfaces that are part of the Pazpar2 source package, and which
    demonstrate some ways to use Pazpar2.  (Note that Debian users can 
    save time by just installing the package <literal>pazpar2-test1</literal>.)
   </para>
   <para>
    A web server, such as Apache, must be installed and running on the system.
   </para>

   <para>
    Start the Pazpar2 daemon using the 'in-source' binary of the Pazpar2
    daemon. On Unix the process is:
    <screen>
     cd etc
     cp pazpar2.cfg.dist pazpar2.cfg
     ../src/pazpar2 -f pazpar2.cfg
    </screen>
    And on Windows:
    <screen>
     cd etc
     copy pazpar2.cfg.dist pazpar2.cfg
     ..\bin\pazpar2 -f pazpar2.cfg
    </screen>
    This will start a Pazpar2 listener on port 9004. It will proxy 
    HTTP requests to port 80 on localhost, which we assume will be the regular
    HTTP server on the system. Inspect and modify pazpar2.cfg as needed
    if this is to be changed. The pazpar2.cfg file includes settings from the
    file <filename>settings/edu.xml</filename>
    to use for searches.
   </para>

   <para>
    The test UIs are located in <literal>www</literal>. Ensure that this
    directory is available to the web server by copying
    <literal>www</literal> to the document root, 
    using Apache's <literal>Alias</literal> directive, or
    creating a symbolic link: for example, on a Debian or Ubuntu
    system with Apache2 installed from the standard package, you might
    make the link as follows:
    <screen>
     cd .../pazpar2
     sudo ln -s `pwd`/www /var/www/pazpar2-demo
    </screen>
   </para>
   
   <para>
    This makes the test applications visible at
    <ulink url="http://localhost/pazpar2-demo/"/>
    but they can not be run successfully from that URL, as they submit
    search requests back to the server form which they were served,
    and Apache2 doesn't know how to handle them.  Instead, the test
    applications must be accessed from Pazpar2 itself, acting as a
    proxy to Apache2, at the URL
    <ulink url="http://localhost:9004/pazpar2-demo/"/>
   </para>

   <para>
    From here, the demo applications can be
    accessed: <literal>test1</literal>, <literal>test2</literal> and
    <literal>jsdemo</literal>
    are pure HTML+JavaScript setups, needing no server-side
    intelligence; 
    <literal>demo</literal>
    requires PHP on the server.
   </para>
   <para>
    If you don't see the test interfaces, check whether they are available
    on port 80 (i.e. directly from the Apache2 server).  If not, the
    Apache configuration is incorrect.
   </para>
   <para>
    In order to use Apache as frontend for the interface on port 80
    for public access etc., refer to 
    <xref linkend="installation.apache2proxy"/>.
   </para>
  </section>

  <section id="installation.debian">
   <title>Installation on Debian or Ubuntu GNU/Linux</title>
   <para>
    Index Data provides Debian and Ubuntu packages for Pazpar2.
    As of February 2010, these
    are prepared for Debian versions Etch, Lenny and Squeeze; and for
    Ubuntu versions 8.04 (hardy), 8.10 (intrepid), 9.04 (jaunty) and
    9.10 (karmic).  These packages are available at
    <ulink url="&url.pazpar2.download.debian;"/> and
    <ulink url="&url.pazpar2.download.ubuntu;"/>.
   </para>
  </section>

  <section id="installation.apache2proxy">
   <title>Apache 2 Proxy</title>
   <para>
    Apache 2 has a 
    <ulink url="http://httpd.apache.org/docs/2.2/mod/mod_proxy.html">
     proxy module
    </ulink> which allows Pazpar2 to become a backend to an Apache 2
    based web service. The Apache 2 proxy must operate in the
    <emphasis>Reverse</emphasis> Proxy mode.
   </para>
   
   <para>
    On a Debian based Apache 2 system, the relevant modules can
    be enabled with:
    <screen>
     sudo a2enmod proxy_http
    </screen>
   </para>

   <para>
    Traditionally Pazpar2 interprets URL paths with suffix 
    <literal>/search.pz2</literal>.
    The 
    <ulink 
     url="http://httpd.apache.org/docs/2.2/mod/mod_proxy.html#proxypass"
     >ProxyPass</ulink> directive of Apache must be used to map a URL path
    the the Pazpar2 server (listening port).
   </para>

   <note>
    <para>
     The ProxyPass directive takes a prefix rather than
     a suffix as URL path. It is important that the Java Script code
     uses the prefix given for it.
    </para>
   </note>

   <example id="installation.apache2proxy.example">
    <title>Apache 2 proxy configuration</title>
    <para>
     If Pazpar2 is running on port 8004 and the portal is using
     <filename>search.pz2</filename> inside portal in directory
     <filename>/myportal/</filename> we could use the following
     Apache 2 configuration:

     <screen><![CDATA[
      <IfModule mod_proxy.c>
       ProxyRequests Off
      
       <Proxy *>
        AddDefaultCharset off
        Order deny,allow
        Allow from all
       </Proxy>
      
       ProxyPass /myportal/search.pz2 http://localhost:8004/search.pz2
       ProxyVia Off
      </IfModule>
      ]]></screen>
    </para>
   </example>
  </section>

 </chapter>

 <chapter id="using">
  <title>Using Pazpar2</title>
  <para>
   This chapter provides a general introduction to the use and
   deployment of Pazpar2. 
  </para>

  <section id="architecture">
   <title>Pazpar2 and your systems architecture</title>
   <para>
    Pazpar2 is designed to provide asynchronous, behind-the-scenes
    metasearching functionality to your application, exposing this
    functionality using a simple webservice API that can be accessed
    from any number of development environments. In particular, it is
    possible to combine Pazpar2 either with your server-side dynamic
    website scripting, with scripting or code running in the browser, or
    with any combination of the two. Pazpar2 is an excellent tool for
    building advanced, Ajax-based user interfaces for metasearch
    functionality, but it isn't a requirement -- you can choose to use
    Pazpar2 entirely as a backend to your regular server-side scripting.
    When you do use Pazpar2 in conjunction
    with browser scripting (JavaScript/Ajax, Flash, applets,
    etc.), there are    special considerations.
   </para>

   <para>
    Pazpar2 implements a simple but efficient HTTP server, and it is
    designed to interact directly with scripting running in the browser
    for the best possible performance, and to limit overhead when
    several browser clients generate numerous webservice requests.
    However, it is still desirable to use a conventional webserver,
    such as Apache, to serve up graphics, HTML documents, and
    server-side scripting. Because the security sandbox environment of
    most browser-side programming environments only allows communication
    with the server from which the enclosing HTML page or object
    originated, Pazpar2 is designed so that it can act as a transparent
    proxy in front of an existing webserver (see <xref
     linkend="pazpar2_conf"/> for details). 
    In this mode, all regular
    HTTP requests are transparently passed through to your webserver,
    while Pazpar2 only intercepts search-related webservice requests.
   </para>

   <para>
    If you want to expose your combined service on port 80, you can
    either run your regular webserver on a different port, a different
    server, or a different IP address associated with the same server.
   </para>

   <para>
    Pazpar2 can also work behind
    a reverse Proxy. Refer to <xref linkend="installation.apache2proxy"/>)
    for more information.
    This allows your existing HTTP server to operate on port 80 as usual.
    Pazpar2 can be started on another (internal) port.
   </para>

   <para>
    Sometimes, it may be necessary to implement functionality on your
    regular webserver that makes use of search results, for example to
    implement data import functionality, emailing results, history
    lists, personal citation lists, interlibrary loan functionality,
    etc. Fortunately, it is simple to exchange information between
    Pazpar2, your browser scripting, and backend server-side scripting.
    You can send a session ID and possibly a record ID from your browser
    code to your server code, and from there use Pazpar2s webservice API
    to access result sets or individual records. You could even 'hide'
    all of Pazpar2s functionality between your own API implemented on
    the server-side, and access that from the browser or elsewhere. The
    possibilities are just about endless.
   </para>
  </section>

  <section id="data_model">
   <title>Your data model</title>
   <para>
    Pazpar2 does not have a preconceived model of what makes up a data
    model. There are no assumptions that records have specific fields or
    that they are organized in any particular way. The only assumption
    is that data comes packaged in a form that the software can work
    with (presently, that means XML or MARC), and that you can provide
    the necessary information to massage it into Pazpar2's internal
    record abstraction.
   </para>

   <para>
    Handling retrieval records in Pazpar2 is a two-step process. First,
    you decide which data elements of the source record you are
    interested in, and you specify any desired massaging or combining of
    elements using an XSLT stylesheet (MARC records are automatically
    normalized to <ulink url="&url.marcxml;">MARCXML</ulink> before this step).
    If desired, you can run multiple XSLT stylesheets in series to accomplish
    this, but the output of the last one should be a representation of the
    record in a schema that Pazpar2 understands.
   </para>

   <para>
    The intermediate, internal representation of the record looks like
    this:
    <screen><![CDATA[
     <record   xmlns="http://www.indexdata.com/pazpar2/1.0"
     mergekey="title The Shining author King, Stephen">

     <metadata type="title">The Shining</metadata>

     <metadata type="author">King, Stephen</metadata>

     <metadata type="kind">ebook</metadata>

     <!-- ... and so on -->
    </record>
     ]]></screen>

    As you can see, there isn't much to it. There are really only a few
    important elements to this file.
   </para>

   <para>
    Elements should belong to the namespace
    <literal>http://www.indexdata.com/pazpar2/1.0</literal>.
    If the root node contains the
    attribute 'mergekey', then every record that generates the same
    merge key (normalized for case differences, white space, and
    truncation) will be joined into a cluster. In other words, you
    decide how records are merged. If you don't include a merge key,
    records are never merged. The 'metadata' elements provide the meat
    of the elements -- the content. the 'type' attribute is used to
    match each element against processing rules that determine what
    happens to the data element next.
   </para>

   <para>
    The next processing step is the extraction of metadata from the
    intermediate representation of the record. This is governed by the
    'metadata' elements in the 'service' section of the configuration
    file. See <xref linkend="config-server"/> for details. The metadata
    in the retrieval record ultimately drives merging, sorting, ranking,
    the extraction of browse facets, and display, all configurable.
   </para>
  </section>

  <section id="client">
   <title>Client development overview</title>
   <para>
    You can use Pazpar2 from any environment that allows you to use
    webservices. The initial goal of the software was to support
    Ajax-based applications, but there literally are no limits to what
    you can do. You can use Pazpar2 from Javascript, Flash, Java, etc.,
    on the browser side, and from any development environment on the
    server side, and you can pass session tokens and record IDs freely
    around between these environments to build sophisticated applications.
    Use your imagination.
   </para>

   <para>
    The webservice API of Pazpar2 is described in detail in <xref
     linkend="pazpar2_protocol"/>.
   </para>

   <para>
    In brief, you use the 'init' command to create a session, a
    temporary workspace which carries information about the current
    search. You start a new search using the 'search' command. Once the
    search has been started, you can follow its progress using the
    'stat', 'bytarget', 'termlist', or 'show' commands. Detailed records
    can be fetched using the 'record' command.
   </para>
  </section>

  &sect-ajaxdev;

  <section id="nonstandard">
   <title>Connecting to non-standard resources</title>
   <para>
    Pazpar2 uses Z39.50 as its switchboard language -- i.e. as far as it
    is concerned, all resources speak Z39.50, its webservices derivatives,
    SRU/SRW and SOLR servers exposing Lucene indexes. It is, however, equipped
    to handle a broad range of different server behavior, through
    configurable query mapping and record normalization. If you develop
    configuration, stylesheets, etc., for a new type of resources, we
    encourage you to share your work. But you can also use Pazpar2 to
    connect to hundreds of resources that do not support standard
    protocols.
   </para>

   <para>
    For a growing number of resources, Z39.50 is all you need. Over the
    last few years, a number of commercial, full-text resources have
    implemented Z39.50. These can be used through Pazpar2 with little or
    no effort. Resources that use non-standard record formats will
    require a bit of XSLT work, but that's all.
   </para>

   <para>
    But what about resources that don't support Z39.50 at all? Some resources might
    support OpenSearch, private, XML/HTTP-based protocols, or something
    else entirely. Some databases exist only as web user interfaces and
    will require screen-scraping. Still others exist only as static
    files, or perhaps as databases supporting the OAI-PMH protocol.
    There is hope! Read on.
   </para>

   <para>
    Index Data continues to advocate the support of open standards. We
    work with database vendors to support standards, so you don't have
    to worry about programming against non-standard services. We also
    provide tools (see <ulink
     url="http://www.indexdata.com/simpleserver">SimpleServer</ulink>)
    which make it comparatively easy to build gateways against servers
    with non-standard behavior. Again, we encourage you to share any
    work you do in this direction.
   </para>

   <para>
    But the bottom line is that working with non-standard resources in
    metasearching is really, really hard. If you want to build a
    project with Pazpar2, and you need access to resources with
    non-standard interfaces, we can help. We run gateways to more than
    2,000 popular, commercial databases and other resources,
    making it simple 
    to plug them directly into Pazpar2. For a small annual fee per
    database, we can help you establish connections to your licensed
    resources. Meanwhile, you can help! If you build your own
    standards-compliant gateways, host them for others, or share the
    code! And tell your vendors that they can save everybody money and
    increase the appeal of their resources by supporting standards.
   </para>

   <para>
    There are those who will ask us why we are using Z39.50 as our
    switchboard language rather than a different protocol. Basically,
    we believe that Z39.50 is presently the most widely implemented 
    information retrieval protocol that has the level of functionality
    required to support a good metasearching experience (structured
    searching, structured, well-defined results). It is also compact and
    efficient, and there is a very broad range of tools available to
    implement it.
   </para>
  </section>

  <section id="unicode">
   <title>Unicode Compliance</title>
   <para>
    Pazpar2 is Unicode compliant and language and locale aware but relies
    on character encoding for the targets to be specified correctly if
    the targets themselves are not UTF-8 based (most aren't).
    Just a few bad behaving targets can spoil the search experience
    considerably if for example Greek, Russian or otherwise non 7-bit ASCII
    search terms are entered. In these cases some targets return
    records irrelevant to the query, and the result screens will be
    cluttered with noise.
   </para>
   <para>
    While noise from misbehaving targets can not be removed, it can
    be reduced using truly Unicode based ranking. This is an
    option which is available to the system administrator if ICU
    support is compiled into Pazpar2, see
    <xref linkend="installation"/> for details.
   </para>
   <para>
    In addition, the ICU tokenization and normalization rules must
    be defined in the master configuration file described in 
    <xref linkend="config-server"/>.
   </para>
  </section>

  <section id="load_balancing">
   <title>Load balancing</title>
   <para>
     Just like any web server, Pazpar2, can be load balanced by a standard hardware or software load balancer as long as the session stickiness is ensured. If you are already running the Apache2 web server in front of Pazpar2 and use the apache mod_proxy module to 'relay' client requests to Pazpar2, this set up can be easily extended to include load balancing capabilites. To do so you need to enable the <ulink url="http://httpd.apache.org/docs/2.2/mod/mod_proxy_balancer.html">
     mod_proxy_balancer
    </ulink> module in your Apache2 installation.
   </para>
   
   <para>
    On a Debian based Apache 2 system, the relevant modules can
    be enabled with:
    <screen>
     sudo a2enmod proxy_http
    </screen>
   </para>

   <para>
     The mod_proxy_balancer can pass all 'sessionsticky' requests to the same backend worker as long as the requests are marked with the originating worker's ID (called 'route'). If the Pazpar2 serverID is configured (by setting an 'id' attribute on the 'server' element in the Pazpar2 configuration file) Pazpar2 will append it to the 'session' element returned during the 'init' in a mod_proxy_balancer compatible manner. Since the 'session' is then re-sent by the client (for all pazpar2 request besides 'init'), the balancer can use the marker to pass the request to the right route. To do so the balancer needs to be configured to inspect the 'session' parameter.
   </para>

   <example id="load_balancing.example">
    <title>Apache 2 load balancing configuration</title>
    <para>
     Having 4 Pazpar2 instances running on the same host, port range of 8004-8007 and serverIDs of: pz1, pz2, pz3 and pz4 respectively we could use the following Apache 2 configuration to expose a single pazpar2 'endpoint' on a standard (<filename>/pazpar2/search.pz2</filename>) location:

     <screen><![CDATA[
       <Proxy *>
         AddDefaultCharset off
         Order deny,allow
         Allow from all
       </Proxy>
       ProxyVia Off

       # 'route' has to match the configured pazpar2 server ID
       <Proxy balancer://pz2cluster>
         BalancerMember http://localhost:8004 route=pz1
         BalancerMember http://localhost:8005 route=pz2
         BalancerMember http://localhost:8006 route=pz3
         BalancerMember http://localhost:8007 route=pz4
       </Proxy>

       # route is resent in the 'session' param which has the form: 
       # 'sessid.serverid', understandable by the mod_proxy_load_balancer
       # this is not going to work if the client tampers with the 'session' param
       ProxyPass /pazpar2/search.pz2 balancer://pz2cluster lbmethod=byrequests stickysession=session nofailover=On]]></screen>

     The 'ProxyPass' line sets up a reverse proxy for request ‘/pazpar2/search.pz2’ and delegates all requests to the load balancer (virtual worker) with name ‘pz2cluster’. Sticky sessions are enabled and implemented using the ‘session’ parameter. The ‘Proxy’ section lists all the servers (real workers) which the load balancer can use.
   </para>

  </example>

  </section>


 </chapter> <!-- Using Pazpar2 -->

 <reference id="reference">
  <title>Reference</title>
  <partintro id="reference-introduction">
   <para>
    The material in this chapter is drawn directly from the individual
    manual entries.
   </para>
  </partintro>
  &manref;
 </reference>

 <appendix id="license"><title>License</title>
  
   <para>
    Pazpar2,
    Copyright &copy; &copyright-year; Index Data.
   </para>
   
   <para>
    Pazpar2 is free software; you can redistribute it and/or modify it under
    the terms of the GNU General Public License as published by the Free
    Software Foundation; either version 2, or (at your option) any later
    version.
   </para>
   
   <para>
    Pazpar2 is distributed in the hope that it will be useful, but WITHOUT ANY
    WARRANTY; without even the implied warranty of MERCHANTABILITY or
    FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
    for more details.
   </para>
   
   <para>
    You should have received a copy of the GNU General Public License
    along with Pazpar2; see the file LICENSE.  If not, write to the
    Free Software Foundation, 
    51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
   </para>

 </appendix>

 &gpl2;
 
</book>

 <!-- Keep this comment at the end of the file
 Local variables:
 mode: sgml
 sgml-omittag:t
 sgml-shorttag:t
 sgml-minimize-attributes:nil
 sgml-always-quote-attributes:t
 sgml-indent-step:1
 sgml-indent-data:t
 sgml-parent-document: nil
 sgml-local-catalogs: nil
 sgml-namecase-general:t
 End:
 -->