X-Git-Url: http://jsfdemo.indexdata.com/?a=blobdiff_plain;ds=sidebyside;f=doc%2Ffrontend.xml;h=14a564bf954cfa7e9d3623b31554125f7bc15554;hb=b0d1f433788c844fc82a715be4e5a34db9dcbe3a;hp=61d85affb31427e33e646c9f8cc9319041c0ea71;hpb=1f14d2d8be1c47d9e97fdd8ec55e2e5113abe899;p=yaz-moved-to-github.git
diff --git a/doc/frontend.xml b/doc/frontend.xml
index 61d85af..14a564b 100644
--- a/doc/frontend.xml
+++ b/doc/frontend.xml
@@ -1,314 +1,351 @@
-
-Making an IR Server for Your Database
-
-Introduction
-
-
-If you aren't into documentation, a good way to learn how the
-backend interface works is to look at the backend.h
-file. Then, look at the small dummy-server in
-ztest/ztest.c. Finally, you can have a look at
-the seshigh.c file, which is where most of the
-logic of the frontend server is located. The backend.h
-file also makes a good reference, once you've chewed your way through
-the prose of this file.
-
-
-
-If you have a database system that you would like to make available by
-means of Z39.50, &yaz; basically offers your two options. You
-can use the APIs provided by the &asn;, &odr;, and &comstack;
-modules to
-create and decode PDUs, and exchange them with a client.
-Using this low-level interface gives you access to all fields and
-options of the protocol, and you can construct your server as close
-to your existing database as you like.
-It is also a fairly involved process, requiring
-you to set up an event-handling mechanism, protocol state machine,
-etc. To simplify server implementation, we have implemented a compact
-and simple, but reasonably full-functioned server-frontend that will
-handle most of the protocol mechanics, while leaving you to
-concentrate on your database interface.
-
-
-
-
-The backend interface was designed in anticipation of a specific
-integration task, while still attempting to achieve some degree of
-generality. We realise fully that there are points where the
-interface can be improved significantly. If you have specific
-functions or parameters that you think could be useful, send us a
-mail (or better, sign on to the mailing list referred to in the
-toplevel README file). We will try to fit good suggestions into future
-releases, to the extent that it can be done without requiring
-too many structural changes in existing applications.
-
-
-
-
-The Database Frontend
-
-
-We refer to this software as a generic database frontend. Your
-database system is the backend database, and the
-interface between the two is called the backend API.
-The backend API consists of a small number of function handlers and
-structure definitions. You are required to provide the
-main() routine for the server (which can be
-quite simple), as well as a set of handlers to match each of the prototypes.
-The interface functions that you write can use any mechanism you like
-to communicate with your database system: You might link the whole
-thing together with your database application and access it by
-function calls; you might use IPC to talk to a database server
-somewhere; or you might link with third-party software that handles
-the communication for you (like a commercial database client library).
-At any rate, the handlers will perform the tasks of:
-
-
-
-
-
-Initialization.
-
-
-
-Searching.
-
-
-
-Fetching records.
-
-
-
-Scanning the database index (optional - if you wish to implement SCAN).
-
-
-
-Extended Services (optional).
-
-
-
-Result-Set Delete (optional).
-
-
-
-Result-Set Sort (optional).
-
-
-
-
-
-(more functions will be added in time to support as much of
-Z39.50-1995 as possible).
-
-
-
-The Backend API
-
-
-The headers files that you need to use the interface are in the
-include/yaz directory. They are called
-statserv.h and backend.h. They
-will include other files from the include/yaz
-directory, so you'll probably want to use the -I option of your
-compiler to tell it where to find the files. When you run
-make in the toplevel &yaz; directory,
-everything you need to create your server is put the
-lib/libyaz.a library.
-
-
-
-Your main() Routine
-
-
-As mentioned, your main() routine can be quite brief.
-If you want to initialize global parameters, or read global configuration
-tables, this is the place to do it. At the end of the routine, you should
-call the function
-
-
-
+
+ Generic server
+ Introduction
+
+
+ If you aren't into documentation, a good way to learn how the
+ back end interface works is to look at the backend.h
+ file. Then, look at the small dummy-server in
+ ztest/ztest.c. The backend.h
+ file also makes a good reference, once you've chewed your way through
+ the prose of this file.
+
+
+
+ If you have a database system that you would like to make available by
+ means of Z39.50 or SRU, &yaz; basically offers your two options. You
+ can use the APIs provided by the &asn;, &odr;, and &comstack;
+ modules to
+ create and decode PDUs, and exchange them with a client.
+ Using this low-level interface gives you access to all fields and
+ options of the protocol, and you can construct your server as close
+ to your existing database as you like.
+ It is also a fairly involved process, requiring
+ you to set up an event-handling mechanism, protocol state machine,
+ etc. To simplify server implementation, we have implemented a compact
+ and simple, but reasonably full-functioned server-frontend that will
+ handle most of the protocol mechanics, while leaving you to
+ concentrate on your database interface.
+
+
+
+
+ The backend interface was designed in anticipation of a specific
+ integration task, while still attempting to achieve some degree of
+ generality. We realize fully that there are points where the
+ interface can be improved significantly. If you have specific
+ functions or parameters that you think could be useful, send us a
+ mail (or better, sign on to the mailing list referred to in the
+ top-level README file). We will try to fit good suggestions into future
+ releases, to the extent that it can be done without requiring
+ too many structural changes in existing applications.
+
+
+
+
+
+ The &yaz; server does not support XCQL.
+
+
+
+
+ The Database Frontend
+
+
+ We refer to this software as a generic database frontend. Your
+ database system is the backend database, and the
+ interface between the two is called the backend API.
+ The backend API consists of a small number of function handlers and
+ structure definitions. You are required to provide the
+ main() routine for the server (which can be
+ quite simple), as well as a set of handlers to match each of the
+ prototypes.
+ The interface functions that you write can use any mechanism you like
+ to communicate with your database system: You might link the whole
+ thing together with your database application and access it by
+ function calls; you might use IPC to talk to a database server
+ somewhere; or you might link with third-party software that handles
+ the communication for you (like a commercial database client library).
+ At any rate, the handlers will perform the tasks of:
+
+
+
+
+
+ Initialization.
+
+
+
+ Searching.
+
+
+
+ Fetching records.
+
+
+
+ Scanning the database index (optional - if you wish to implement SCAN).
+
+
+
+ Extended Services (optional).
+
+
+
+ Result-Set Delete (optional).
+
+
+
+ Result-Set Sort (optional).
+
+
+
+ Return Explain for SRU (optional).
+
+
+
+
+
+ (more functions will be added in time to support as much of
+ Z39.50-1995 as possible).
+
+
+
+ The Backend API
+
+
+ The header file that you need to use the interface are in the
+ include/yaz directory. It's called
+ backend.h. It will include other files from
+ the include/yaz directory, so you'll
+ probably want to use the -I option of your compiler to tell it
+ where to find the files. When you run
+ make in the top-level &yaz; directory,
+ everything you need to create your server is to link with the
+ lib/libyaz.la library.
+
+
+
+ Your main() Routine
+
+
+ As mentioned, your main() routine can be quite brief.
+ If you want to initialize global parameters, or read global configuration
+ tables, this is the place to do it. At the end of the routine, you should
+ call the function
+
+
+
int statserv_main(int argc, char **argv,
- bend_initresult *(*bend_init)(bend_initrequest *r),
- void (*bend_close)(void *handle));
-
-
-
-The third and fourth arguments are pointers to handlers. Handler
-bend_init is called whenever the server receives
-an Initialize Request, so it serves as a Z39.50 session initializer. The
-bend_close handler is called when the session is
-closed.
-
-
-
-statserv_main will establish listening sockets
-according to the parameters given. When connection requests are received,
-the event handler will typically fork() and
-create a sub-process to handle a new connection.
-Alternatively the server may be setup to create threads for each connection.
-If you do use global variables and forking, you should be aware, then,
-that these cannot be shared between associations, unless you explicitly
-disable forking by command line parameters.
-
-
-
-The server provides a mechanism for controlling some of its behavior
-without using command-line options. The function
-
-
-
-statserv_options_block *statserv_getcontrol(void);
-
-
-
-Will return a pointer to a struct statserv_options_block
-describing the current default settings of the server. The structure
-contains these elements:
-
-
-int dynamic
-A boolean value, which determines whether the server
-will fork on each incoming request (TRUE), or not (FALSE). Default is
-TRUE. This flag is only read by UNIX-based servers (WIN32 based servers
-doesn't fork).
-
-
-int threads
-A boolean value, which determines whether the server
-will create a thread on each incoming request (TRUE), or not (FALSE).
-Default is FALSE. This flag is only read by UNIX-based servers that offer
-POSIX Threads support. WIN32-based servers always operate in threaded mode.
-
-
-int inetd
-A boolean value, which determines whether the server
-will operates under a UNIX INET daemon (inetd). Default is FALSE.
-
-
-int loglevel
-Set this by ORing the constants defined in
-include/yaz/yaz-log.h.
-
-
-char logfile[ODR_MAXNAME+1]
-File for diagnostic output ("": stderr).
-
-char apdufile[ODR_MAXNAME+1]
-
-Name of file for logging incoming and outgoing APDUs ("": don't
-log APDUs, "-": stderr).
-
-
-char default_listen[1024]
-Same form as the command-line specification of
-listener address. "": no default listener address.
-Default is to listen at "tcp:@:9999". You can only
-specify one default listener address in this fashion.
-
-
-enum oid_proto default_proto;
-Either PROTO_SR or
-PROTO_Z3950. Default is PROTO_Z39_50.
-
-int idle_timeout;
-Maximum session idletime, in minutes. Zero indicates
-no (infinite) timeout. Default is 120 minutes.
-
-
-int maxrecordsize;
-Maximum permissible record (message) size. Default
-is 1Mb. This amount of memory will only be allocated if a client requests a
-very large amount of records in one operation (or a big record). Set it
-to a lower number
-if you are worried about resource consumption on your host system.
-
-
-char configname[ODR_MAXNAME+1]
-Passed to the backend when a new connection is received.
-
-
-char setuid[ODR_MAXNAME+1]
-Set user id to the user specified, after binding
-the listener addresses.
-
-
-void (*bend_start)(struct statserv_options_block *p)
-Pointer to function which is called after the command line
-options have been parsed - but before the server starts listening. For
-forked UNIX servers this handler is called in the mother process; for
-threaded servers this handler is called in the main thread. The default
-value of this pointer is NULL in which case it isn't invoked by the frontend
-server. When the server operates as an NT service this handler is called
-whenever the service is started.
-
-
-void (*bend_stop)(struct statserv_options_block *p)
-Pointer to function which is called whenver the server
-has stopped listening for incoming connections. This function pointer
-has a default value of NULL in which case it isn't called.
-When the server operates as an NT service this handler is called
-whenever the service is stopped.
-
-
-void *handle
-User defined pointer (default value NULL).
-This is a per-server handle that can be used to specify "user-data".
-Do not confuse this with the session-handle as returned by bend_init.
-
-
-
-
-
-
-The pointer returned by statserv_getcontrol points to
-a static area. You are allowed to change the contents of the structure,
-but the changes will not take effect before you call
-
-
-
+ bend_initresult *(*bend_init)(bend_initrequest *r),
+ void (*bend_close)(void *handle));
+
+
+
+ The third and fourth arguments are pointers to handlers. Handler
+ bend_init is called whenever the server receives
+ an Initialize Request, so it serves as a Z39.50 session initializer. The
+ bend_close handler is called when the session is
+ closed.
+
+
+
+ statserv_main will establish listening sockets
+ according to the parameters given. When connection requests are received,
+ the event handler will typically fork() and
+ create a sub-process to handle a new connection.
+ Alternatively the server may be setup to create threads for each
+ connection.
+ If you do use global variables and forking, you should be aware, then,
+ that these cannot be shared between associations, unless you explicitly
+ disable forking by command line parameters.
+
+
+
+ The server provides a mechanism for controlling some of its behavior
+ without using command-line options. The function
+
+
+
+ statserv_options_block *statserv_getcontrol(void);
+
+
+
+ will return a pointer to a struct statserv_options_block
+ describing the current default settings of the server. The structure
+ contains these elements:
+
+
+
+ int dynamic
+ A boolean value, which determines whether the server
+ will fork on each incoming request (TRUE), or not (FALSE). Default is
+ TRUE. This flag is only read by UNIX-based servers (WIN32 based servers
+ doesn't fork).
+
+
+
+ int threads
+ A boolean value, which determines whether the server
+ will create a thread on each incoming request (TRUE), or not (FALSE).
+ Default is FALSE. This flag is only read by UNIX-based servers
+ that offer POSIX Threads support.
+ WIN32-based servers always operate in threaded mode.
+
+
+
+ int inetd
+ A boolean value, which determines whether the server
+ will operates under a UNIX INET daemon (inetd). Default is FALSE.
+
+
+
+ char logfile[ODR_MAXNAME+1]
+ File for diagnostic output ("": stderr).
+
+
+
+ char apdufile[ODR_MAXNAME+1]
+
+ Name of file for logging incoming and outgoing APDUs
+ ("": don't log APDUs, "-":
+ stderr).
+
+
+
+ char default_listen[1024]
+ Same form as the command-line specification of
+ listener address. "": no default listener address.
+ Default is to listen at "tcp:@:9999". You can only
+ specify one default listener address in this fashion.
+
+
+
+ enum oid_proto default_proto;
+ Either PROTO_Z3950 or
+ PROTO_SR.
+ Default is PROTO_Z39_50.
+
+
+
+ int idle_timeout;
+ Maximum session idle-time, in minutes. Zero indicates
+ no (infinite) timeout. Default is 15 minutes.
+
+
+
+ int maxrecordsize;
+ Maximum permissible record (message) size. Default
+ is 1Mb. This amount of memory will only be allocated if a
+ client requests a very large amount of records in one operation
+ (or a big record).
+ Set it to a lower number if you are worried about resource
+ consumption on your host system.
+
+
+
+ char configname[ODR_MAXNAME+1]
+ Passed to the backend when a new connection is received.
+
+
+
+ char setuid[ODR_MAXNAME+1]
+ Set user id to the user specified, after binding
+ the listener addresses.
+
+
+
+ void (*bend_start)(struct statserv_options_block *p)
+
+ Pointer to function which is called after the
+ command line options have been parsed - but before the server
+ starts listening.
+ For forked UNIX servers this handler is called in the mother
+ process; for threaded servers this handler is called in the
+ main thread.
+ The default value of this pointer is NULL in which case it
+ isn't invoked by the frontend server.
+ When the server operates as an NT service this handler is called
+ whenever the service is started.
+
+
+
+ void (*bend_stop)(struct statserv_options_block *p)
+
+ Pointer to function which is called whenever the server
+ has stopped listening for incoming connections. This function pointer
+ has a default value of NULL in which case it isn't called.
+ When the server operates as an NT service this handler is called
+ whenever the service is stopped.
+
+
+
+ void *handle
+ User defined pointer (default value NULL).
+ This is a per-server handle that can be used to specify "user-data".
+ Do not confuse this with the session-handle as returned by bend_init.
+
+
+
+
+
+
+ The pointer returned by statserv_getcontrol points to
+ a static area. You are allowed to change the contents of the structure,
+ but the changes will not take effect before you call
+
+
+
void statserv_setcontrol(statserv_options_block *block);
-
+
-
-
-that you should generally update this structure before calling
-statserv_main().
-
-
-
+
+
+ that you should generally update this structure before calling
+ statserv_main().
+
+
+
-The Backend Functions
+ The Backend Functions
-
-For each service of the protocol, the backend interface declares one or
-two functions. You are required to provide implementations of the
-functions representing the services that you wish to implement.
-
+
+ For each service of the protocol, the backend interface declares one or
+ two functions. You are required to provide implementations of the
+ functions representing the services that you wish to implement.
+
-Init
+ Init
-
+
bend_initresult (*bend_init)(bend_initrequest *r);
-
-
-
-This handler is called once for each new connection request, after
-a new process/thread has been created, and an Initialize Request has been
-received from the client. The pointer to the bend_init
-handler is passed in the call to statserv_start.
-
-
-Unlike previous versions of YAZ, the bend_init also
-serves as a handler that defines the Z39.50 services that the backend
-wish to support. Pointers to all service handlers,
-including search - and fetch must be specified here in this handler.
-
-
-The request - and result structures are defined as
-
-
-
+
+
+
+ This handler is called once for each new connection request, after
+ a new process/thread has been created, and an Initialize Request has
+ been received from the client. The pointer to the
+ bend_init handler is passed in the call to
+ statserv_start.
+
+
+
+ This handler is also called when operating in SRU mode - when
+ a connection has been made (even though SRU does not offer
+ this service).
+
+
+
+ Unlike previous versions of YAZ, the bend_init also
+ serves as a handler that defines the Z39.50 services that the backend
+ wish to support. Pointers to all service handlers,
+ including search - and fetch must be specified here in this handler.
+
+
+ The request - and result structures are defined as
+
+
+
typedef struct bend_initrequest
{
Z_IdAuthentication *auth;
@@ -317,6 +354,7 @@ typedef struct bend_initrequest
Z_ReferenceId *referenceId;/* reference ID */
char *peer_name; /* dns host of peer (client) */
+ char *implementation_id;
char *implementation_name;
char *implementation_version;
int (*bend_sort) (void *handle, bend_sort_rr *rr);
@@ -327,6 +365,13 @@ typedef struct bend_initrequest
int (*bend_delete)(void *handle, bend_delete_rr *rr);
int (*bend_scan)(void *handle, bend_scan_rr *rr);
int (*bend_segment)(void *handle, bend_segment_rr *rr);
+
+ ODR decode; /* decoding stream */
+ /* character set and language negotiation - see include/yaz/z-charneg.h */
+ Z_CharSetandLanguageNegotiation *charneg_request;
+ Z_External *charneg_response;
+ int (*bend_srw_explain)(void *handle, bend_explain_rr *rr);
+ int (*bend_srw_scan)(void *handle, bend_scan_rr *rr);
} bend_initrequest;
typedef struct bend_initresult
@@ -335,63 +380,65 @@ typedef struct bend_initresult
char *errstring; /* system error string or NULL */
void *handle; /* private handle to the backend module */
} bend_initresult;
-
-
-
-In general, the server frontend expects that the
-bend_*result pointer that you return is valid at
-least until the next call to a bend_* function.
-This applies to all of the functions described herein. The parameter
-structure passed to you in the call belongs to the server frontend, and
-you should not make assumptions about its contents after the current
-function call has completed. In other words, if you want to retain any
-of the contents of a request structure, you should copy them.
-
-
-
-The errcode should be zero if the initialization of
-the backend went well. Any other value will be interpreted as an error.
-The errstring isn't used in the current version, but one
-optin would be to stick it in the initResponse as a VisibleString.
-The handle is the most important parameter. It should
-be set to some value that uniquely identifies the current session to
-the backend implementation. It is used by the frontend server in any
-future calls to a backend function.
-The typical use is to set it to point to a dynamically allocated state
-structure that is private to your backend module.
-
-
-
-The auth member holds the authentication information
-part of the Z39.50 Initialize Request. Interpret this if your serves
-requires authentication.
-
-
-
-The members peer_name,
-implementation_name and
-implementation_version holds DNS of client, name
-of client (Z39.50) implementation - and version.
-
-
-
-The bend_ - members are set to NULL when
-bend_init is called. Modify the pointers by setting them
-to point to backend functions.
-
-
-
-
-Search and retrieve
-
-We now describe the handlers that are required to support search -
-and retrieve. You must support two functions - one for seearch - and one
-for fetch (retrieval of one record). If desirable you can provide a
-third handler which is called when a present request is received which
-allows you to optimize retrieval of multiple-records.
-
-
-
+
+
+
+ In general, the server frontend expects that the
+ bend_*result pointer that you return is valid at
+ least until the next call to a bend_* function.
+ This applies to all of the functions described herein. The parameter
+ structure passed to you in the call belongs to the server frontend, and
+ you should not make assumptions about its contents after the current
+ function call has completed. In other words, if you want to retain any
+ of the contents of a request structure, you should copy them.
+
+
+
+ The errcode should be zero if the initialization of
+ the backend went well. Any other value will be interpreted as an error.
+ The errstring isn't used in the current version, but
+ one option would be to stick it in the initResponse as a VisibleString.
+ The handle is the most important parameter. It should
+ be set to some value that uniquely identifies the current session to
+ the backend implementation. It is used by the frontend server in any
+ future calls to a backend function.
+ The typical use is to set it to point to a dynamically allocated state
+ structure that is private to your backend module.
+
+
+
+ The auth member holds the authentication information
+ part of the Z39.50 Initialize Request. Interpret this if your serves
+ requires authentication.
+
+
+
+ The members peer_name,
+ implementation_id,
+ implementation_name and
+ implementation_version holds
+ DNS of client, ID of implementor, name
+ of client (Z39.50) implementation - and version.
+
+
+
+ The bend_ - members are set to NULL when
+ bend_init is called. Modify the pointers by
+ setting them to point to backend functions.
+
+
+
+
+ Search and Retrieve
+
+ We now describe the handlers that are required to support search -
+ and retrieve. You must support two functions - one for search - and one
+ for fetch (retrieval of one record). If desirable you can provide a
+ third handler which is called when a present request is received which
+ allows you to optimize retrieval of multiple-records.
+
+
+
int (*bend_search) (void *handle, bend_search_rr *rr);
typedef struct {
@@ -411,45 +458,62 @@ typedef struct {
int hits; /* number of hits */
int errcode; /* 0==OK */
char *errstring; /* system error string or NULL */
+ Z_OtherInformation *search_info;
} bend_search_rr;
-
-
-
-
-The bend_search handler is a fairly close
-approximation of a protocol Search Request - and Response PDUs
-The setname is the resultSetName from the protocol.
-You are required to establish a mapping between the set name and whatever
-your backend database likes to use.
-Similarly, the replace_set is a boolean value
-corresponding to the resultSetIndicator field in the protocol.
-num_bases/basenames is a length of/array of character
-pointers to the database names provided by the client.
-The query is the full query structure as defined in the
-protocol ASN.1 specification.
-It can be either of the possible query types, and it's up to you to
-determine if you can handle the provided query type.
-Rather than reproduce the C interface here, we'll refer you to the
-structure definitions in the file
-include/yaz/z-core.h. If you want to look at the
-attributeSetId OID of the RPN query, you can either match it against
-your own internal tables, or you can use the
-oid_getentbyoid function provided by &yaz;.
-
-
-
-The structure contains a number of hits, and an
-errcode/errstring pair. If an error occurs
-during the search, or if you're unhappy with the request, you should
-set the errcode to a value from the BIB-1 diagnostic set. The value
-will then be returned to the user in a nonsurrogate diagnostic record
-in the response. The errstring, if provided, will
-go in the addinfo field. Look at the protocol definition for the
-defined error codes, and the suggested uses of the addinfo field.
-
-
-
-
+
+
+
+ The bend_search handler is a fairly close
+ approximation of a protocol Z39.50 Search Request - and Response PDUs
+ The setname is the resultSetName from the protocol.
+ You are required to establish a mapping between the set name and whatever
+ your backend database likes to use.
+ Similarly, the replace_set is a boolean value
+ corresponding to the resultSetIndicator field in the protocol.
+ num_bases/basenames is a length of/array of character
+ pointers to the database names provided by the client.
+ The query is the full query structure as defined in
+ the protocol ASN.1 specification.
+ It can be either of the possible query types, and it's up to you to
+ determine if you can handle the provided query type.
+ Rather than reproduce the C interface here, we'll refer you to the
+ structure definitions in the file
+ include/yaz/z-core.h. If you want to look at the
+ attributeSetId OID of the RPN query, you can either match it against
+ your own internal tables, or you can use the
+ oid_getentbyoid function provided by &yaz;.
+
+
+
+ The structure contains a number of hits, and an
+ errcode/errstring pair. If an error occurs
+ during the search, or if you're unhappy with the request, you should
+ set the errcode to a value from the BIB-1 diagnostic set. The value
+ will then be returned to the user in a nonsurrogate diagnostic record
+ in the response. The errstring, if provided, will
+ go in the addinfo field. Look at the protocol definition for the
+ defined error codes, and the suggested uses of the addinfo field.
+
+
+
+ The bend_search handler is also called when
+ the frontend server receives a SRU SearchRetrieveRequest.
+ For SRU, a CQL query is usually provided by the client.
+ The CQL query is available as part of Z_Query
+ structure (note that CQL is now part of Z39.50 via an external).
+ To support CQL in existing implementations that only do Type-1,
+ we refer to the CQL-to-PQF tool described
+ here.
+
+
+
+ To maintain backwards compatibility, the frontend server
+ of yaz always assume that error codes are BIB-1 diagnostics.
+ For SRU operation, a Bib-1 diagnostic code is mapped to
+ SRU diagnostic.
+
+
+
int (*bend_fetch) (void *handle, bend_fetch_rr *rr);
typedef struct bend_fetch_rr {
@@ -471,68 +535,83 @@ typedef struct bend_fetch_rr {
int errcode; /* 0==success */
char *errstring; /* system error string or NULL */
int surrogate_flag; /* surrogate diagnostic */
+ char *schema; /* string record schema input/output */
} bend_fetch_rr;
-
-
-
-The frontend server calls the bend_fetch handler when
-it needs database records to fulfill a Search Request or a Present Request.
-The setname is simply the name of the result set
-that holds the reference to the desired record.
-The number is the offset into the set (with 1
-being the first record in the set). The format field
-is the record format requested by the client (See section
-Object Identifiers). The value
-VAL_NONE indicates that the client did not
-request a specific format. The stream argument
-is an &odr; stream which should be used for
-allocating space for structured data records. The stream will be reset when
-all records have been assembled, and the response package has been transmitted.
-For unstructured data, the backend is responsible for maintaining a static
-or dynamic buffer for the record between calls.
-
-
-
-In the structure, the basename is the name of the
-database that holds the
-record. len is the length of the record returned, in
-bytes, and record is a pointer to the record.
-Last_in_set should be nonzero only if the record
-returned is the last one in the given result set. errcode
-and errstring, if given, will be
-interpreted as a global error pertaining to the set, and will be returned
-in a non-surrogate-diagnostic. If you wish to return the error as a
-surrogate-diagnostic (local error) you can do this by setting
-surrogate_flag to 1 also.
-
-
-
-If the len field has the value -1, then
-record is assumed to point to a constructed data
-type. The format field will be used to determine
-which encoder should be used to serialize the data.
-
-
-
-
-If your backend generates structured records, it should use
-odr_malloc() on the provided stream for allocating
-data: This allows the frontend server to keep track of the record sizes.
-
-
-
-
-The format field is mapped to an object identifier
-in the direct reference of the resulting EXTERNAL representation of the record.
-
-
-
-
-The current version of &yaz; only supports the direct reference mode.
-
-
-
-
+
+
+
+ The frontend server calls the bend_fetch handler
+ when it needs database records to fulfill a Z39.50 Search Request, a
+ Z39.50 Present Request or a SRU SearchRetrieveRequest.
+ The setname is simply the name of the result set
+ that holds the reference to the desired record.
+ The number is the offset into the set (with 1
+ being the first record in the set). The format field
+ is the record format requested by the client (See
+ ).
+ The value VAL_NONE indicates that the client did
+ not request a specific format. The stream argument
+ is an &odr; stream which should be used for
+ allocating space for structured data records.
+ The stream will be reset when all records have been assembled, and
+ the response package has been transmitted.
+ For unstructured data, the backend is responsible for maintaining a
+ static or dynamic buffer for the record between calls.
+
+
+
+ If a SRU SearchRetrieveRequest is received by the frontend server,
+ the referenceId is NULL and the
+ request_format (transfer syntax) is XML (OID name
+ VAL_TEXT_XML).
+ The schema for SRU is stored in both the
+ Z_RecordComposition
+ structure and schema (simple string).
+
+
+
+ In the structure, the basename is the name of the
+ database that holds the
+ record. len is the length of the record returned, in
+ bytes, and record is a pointer to the record.
+ last_in_set should be nonzero only if the record
+ returned is the last one in the given result set.
+ errcode and errstring, if
+ given, will be interpreted as a global error pertaining to the
+ set, and will be returned in a non-surrogate-diagnostic.
+ If you wish to return the error as a surrogate-diagnostic
+ (local error) you can do this by setting
+ surrogate_flag to 1 also.
+
+
+
+ If the len field has the value -1, then
+ record is assumed to point to a constructed data
+ type. The format field will be used to determine
+ which encoder should be used to serialize the data.
+
+
+
+
+ If your backend generates structured records, it should use
+ odr_malloc() on the provided stream for allocating
+ data: This allows the frontend server to keep track of the record sizes.
+
+
+
+
+ The format field is mapped to an object identifier
+ in the direct reference of the resulting EXTERNAL representation
+ of the record.
+
+
+
+
+ The current version of &yaz; only supports the direct reference mode.
+
+
+
+
int (*bend_present) (void *handle, bend_present_rr *rr);
typedef struct {
@@ -542,7 +621,7 @@ typedef struct {
oid_value format; /* One of the CLASS_RECSYN members */
Z_ReferenceId *referenceId;/* reference ID */
Z_RecordComposition *comp; /* Formatting instructions */
- ODR stream; /* encoding stream - memory source if required */
+ ODR stream; /* encoding stream */
ODR print; /* printing stream */
bend_request request;
bend_association association;
@@ -551,33 +630,34 @@ typedef struct {
int errcode; /* 0==OK */
char *errstring; /* system error string or NULL */
} bend_present_rr;
-
-
-
-The bend_present handler is called when
-the server receives a Present Request. The setname,
-start and number is the
-name of the result set - start position - and number of records to
-be retrieved respectively. format and
-comp is the preferred transfer syntax and element
-specifications of the present request.
-
-
-Note that this is handler serves as a supplement for
-bend_fetch and need not to be defined in order to
-support search - and retrieve.
-
-
-
-
-Delete
-
-
-For backends that supports delete of a result set only one handler
-must be defined.
-
-
-
+
+
+
+ The bend_present handler is called when
+ the server receives a Z39.50 Present Request.
+ The setname,
+ start and number is the
+ name of the result set - start position - and number of records to
+ be retrieved respectively. format and
+ comp is the preferred transfer syntax and element
+ specifications of the present request.
+
+
+ Note that this is handler serves as a supplement for
+ bend_fetch and need not to be defined in order to
+ support search - and retrieve.
+
+
+
+
+ Delete
+
+
+ For back-ends that supports delete of a result set only one handler
+ must be defined.
+
+
+
int (*bend_delete)(void *handle, bend_delete_rr *rr);
typedef struct bend_delete_rr {
@@ -590,28 +670,28 @@ typedef struct bend_delete_rr {
ODR stream;
ODR print;
} bend_delete_rr;
-
+
-
-
-The delete set function definition is rather primitive, mostly because we
-have had no practical need for it as of yet. If someone wants
-to provide a full delete service, we'd be happy to add the
-extra parameters that are required. Are there clients out there
-that will actually delete sets they no longer need?
-
-
+
+
+ The delete set function definition is rather primitive, mostly because
+ we have had no practical need for it as of yet. If someone wants
+ to provide a full delete service, we'd be happy to add the
+ extra parameters that are required. Are there clients out there
+ that will actually delete sets they no longer need?
+
+
-
+
-scan
+ Scan
-
-For servers that wish to offer the scan service one handler
-must be defined.
-
+
+ For servers that wish to offer the scan service one handler
+ must be defined.
+
-
+
int (*bend_delete)(void *handle, bend_delete_rr *rr);
typedef enum {
@@ -620,7 +700,7 @@ typedef enum {
} bend_scan_status;
typedef struct bend_scan_rr {
- int num_bases; /* number of elements in databaselist */
+ int num_bases; /* number of elements in database list */
char **basenames; /* databases to search */
oid_value attributeset;
Z_ReferenceId *referenceId; /* reference ID */
@@ -636,173 +716,134 @@ typedef struct bend_scan_rr {
bend_scan_status status;
int errcode;
char *errstring;
+ char *scanClause; /* CQL scan clause */
} bend_scan_rr;
-
-
-
-
-Application Invocation
-
-
-The finished application has the following
-invocation syntax (by way of statserv_main()):
-
-
-
-appname [-szSiTu -a apdufile -l logfile -v loglevel -c config]
-[listener ...]
-
-
-
-The options are
-
-
-
--a file
-
-Specify a file for dumping PDUs (for diagnostic purposes).
-The special name "-" sends output to stderr.
-
-
--S
-
-Don't fork or make threads on connection requests. This is good for
-debugging, but not recommended for real operation: Although the server is
-asynchronous and non-blocking, it can be nice to keep a software
-malfunction (okay then, a crash) from affecting all current users.
-
-
--T
-
-Operate the server in threaded mode. The server creates a thread
-for each connection rather than a fork a process. Only available
-on UNIX systems that offers POSIX threads.
-
-
--s
-
-Use the SR protocol (obsolete).
-
-
--z
-
-Use the Z39.50 protocol (default). These two options complement
-each other. You can use both multiple times on the same command
-line, between listener-specifications (see below). This way, you
-can set up the server to listen for connections in both protocols
-concurrently, on different local ports.
-
-
--l file
-The logfile.
-
-
--c config
-A user option that serves as a specifier for some
-sort of configuration, e.g. a filename.
-The argument to this option is transferred to member
-confignameof the statserv_options_block.
-
-
--v level
-
-The log level. Use a comma-separated list of members of the set
-{fatal,debug,warn,log,all,none}.
-
-
--u userid
-
-Set user ID. Sets the real UID of the server process to that of the
-given user. It's useful if you aren't comfortable with having the
-server run as root, but you need to start it as such to bind a
-privileged port.
-
-
--w dir
-
-Working directory.
-
-
--i
-
-Use this when running from the inetd server.
-
-
--t minutes
-
-Idle session timeout, in minutes.
-
-
--k size
-
-Maximum record size/message size, in kilobytes.
-
-
-
-
-
-
-
-A listener specification consists of a transport mode followed by a
-colon (:) followed by a listener address. The transport mode is
-either osi or tcp.
-
-
-
-For TCP, an address has the form
-
-
-
- hostname | IP-number [: portnumber]
-
-
-
-The port number defaults to 210 (standard Z39.50 port).
-
-
-
-For osi, the address form is
-
-
-
- [t-selector /] hostname | IP-number [: portnumber]
-
-
-
-The transport selector is given as a string of hex digits (with an even
-number of digits). The default port number is 102 (RFC1006 port).
-
-
-
-Examples
-
-
-
- tcp:dranet.dra.com
-
- osi:0402/dbserver.osiworld.com:3000
-
-
-
-In both cases, the special hostname "@" is mapped to
-the address INADDR_ANY, which causes the server to listen on any local
-interface. To start the server listening on the registered ports for
-Z39.50 and SR over OSI/RFC1006, and to drop root privileges once the
-ports are bound, execute the server like this (from a root shell):
-
-
-
- my-server -u daemon tcp:@ -s osi:@
-
-
-
-You can replace daemon with another user, eg. your
-own account, or a dedicated IR server account.
-my-server should be the name of your
-server application. You can test the procedure with the
-yaz-ztest application.
-
-
-
-
-
+
+
+ This backend server handles both Z39.50 scan
+ and SRU scan. In order for a handler to distinguish between SRU (CQL) scan
+ Z39.50 Scan , it must check for a non-NULL value of
+ scanClause.
+
+
+
+ if designed today, it would be a choice using a union or similar,
+ but that would break binary compatibility with existing servers.
+
+
+
+
+
+ Application Invocation
+
+
+ The finished application has the following
+ invocation syntax (by way of statserv_main()):
+
+
+ &gfs-synopsis;
+
+
+ The options are:
+
+ &gfs-options;
+
+
+
+
+ A listener specification consists of a transport mode followed by a
+ colon (:) followed by a listener address. The transport mode is
+ either tcp, unix: or
+ ssl.
+
+
+
+ For TCP and SSL, an address has the form
+
+
+
+ hostname | IP-number [: portnumber]
+
+
+
+ The port number defaults to 210 (standard Z39.50 port).
+
+
+
+ For UNIX, the address is the filename of socket.
+
+
+
+ For TCP/IP and SSL, the special hostname @
+ (at sign) is mapped to the address INADDR_ANY,
+ which causes the server to listen on any local interface.
+
+
+ Running the GFS on Unix
+
+ Assuming the server application appname is
+ started as root, the following will make it listen on port 210.
+ The server will change identity to nobody
+ and write its log to /var/log/app.log.
+
+ appname -l /var/log/app.log -u nobody tcp:@:210
+
+
+
+ The server will accept Z39.50 requests and offer SRU service on port 210.
+
+
+ Setting up Apache as SRU Frontend
+
+ If you use Apache
+ as your public web server and want to offer HTTP port 80
+ access to the YAZ server on 210, you can use the
+
+ ProxyPass
+ directive.
+ If you have virtual host
+ srw.mydomain you can use the following directives
+ in Apache's httpd.conf:
+
+ <VirtualHost *>
+ ErrorLog /home/srw/logs/error_log
+ TransferLog /home/srw/logs/access_log
+ ProxyPass / http://srw.mydomain:210/
+ </VirtualHost>
+
+
+
+ The above for the Apache 1.3 series.
+
+
+
+ Running a server with local access only
+
+ Servers that is only being accessed from the local host should listen
+ on UNIX file socket rather than a Internet socket. To listen on
+ /tmp/mysocket start the server as follows:
+
+ appname tcp:/tmp/mysocket
+
+
+
+
+ Virtual Hosts
+ &gfs-virtual;
+
+
+
+