Makefile enhanced. Changed doc a bit.

diff --git a/doc/Makefile b/doc/Makefile
index 19aa500..d2f5cf2 100644 (file)
--- a/doc/Makefile
+++ b/doc/Makefile
@@ -1,17 +1,17 @@
-# $Id: Makefile,v 1.2 1996/01/18 16:07:57 adam Exp $
+# $Id: Makefile,v 1.3 1996/04/25 10:21:53 adam Exp $

 all: egate.ps egate.txt egate.html
 
 egate.txt: egate.sgml
        sgml2txt egate.sgml
 
 egate.dvi: egate.sgml
 all: egate.ps egate.txt egate.html
 
 egate.txt: egate.sgml
        sgml2txt egate.sgml
 
 egate.dvi: egate.sgml

-       sgml2ps -d zebra.sgml
+       sgml2ps -d egate.sgml

 
 egate.ps: egate.sgml
 
 egate.ps: egate.sgml

-       sgml2ps zebra.sgml
+       sgml2ps egate.sgml

 
 egate.html: egate.sgml
 
 egate.html: egate.sgml

-       sgml2html zebra.sgml
+       sgml2html egate.sgml

 
 clean:
        rm -f [0-9]* *.bak
 
 clean:
        rm -f [0-9]* *.bak

diff --git a/doc/egate.sgml b/doc/egate.sgml
index 7eac1a5..72963b6 100644 (file)
--- a/doc/egate.sgml
+++ b/doc/egate.sgml
@@ -1,13 +1,13 @@
 <!doctype linuxdoc system>
 
 <!--
 <!doctype linuxdoc system>
 
 <!--

-  $Id: egate.sgml,v 1.8 1996/01/18 16:07:58 adam Exp $
+  $Id: egate.sgml,v 1.9 1996/04/25 10:21:53 adam Exp $

 -->
 
 <article>
 <title>Email/Z39.50 gateway guide
 <author>Europagate, 1995
 -->
 
 <article>
 <title>Email/Z39.50 gateway guide
 <author>Europagate, 1995

-<date>$Revision: 1.8 $
+<date>$Revision: 1.9 $

 <abstract>
 This document describes a Email server that provides access to the
 Z39.50 protocol.
 <abstract>
 This document describes a Email server that provides access to the
 Z39.50 protocol.

@@ -34,13 +34,13 @@ The ES can use either CNIDR's Zdist package or the YAZ package from
 Index Data to interface the Z39.50 protocol. So you need to obtain
 one of these first.
 
 Index Data to interface the Z39.50 protocol. So you need to obtain
 one of these first.
 

-The Zdist package can be found in:
+The zdist package can be found in:

 
 <htmlurl
 url="ftp://ftp.cnidr.org/pub/NIDR.tools/zdist/zdist102b1-1.tar.Z" 
  name="ftp://ftp.cnidr.org/pub/NIDR.tools/zdist/zdist102b1-1.tar.Z">
 
 
 <htmlurl
 url="ftp://ftp.cnidr.org/pub/NIDR.tools/zdist/zdist102b1-1.tar.Z" 
  name="ftp://ftp.cnidr.org/pub/NIDR.tools/zdist/zdist102b1-1.tar.Z">
 

-The Zdist package doesn't support result-set references. Also, it has a few
+The zdist package doesn't support result-set references. Also, it has a few

 bugs. Therefore we've included a patch <tt/zdist.patch/ which fixes
 some of these bugs.
 Run patch in the directory above <tt/zdist102b1-1/:
 bugs. Therefore we've included a patch <tt/zdist.patch/ which fixes
 some of these bugs.
 Run patch in the directory above <tt/zdist102b1-1/:

@@ -49,12 +49,12 @@ $ patch <zdist.patch
 </verb></tscreen>
 
 The ES server only depends on <tt>libz3950.a</tt> so you only need
 </verb></tscreen>
 
 The ES server only depends on <tt>libz3950.a</tt> so you only need

-to build the Zdist software in the directory <tt/libz3950/.
+to build the zdist software in the directory <tt/libz3950/.

 
 YAZ can be found at the FTP host:
 
 
 YAZ can be found at the FTP host:
 

-<htmlurl url="ftp://130.225.252.168/index/yaz"
- name="ftp://130.225.252.168/index/yaz">
+<htmlurl url="ftp://ftp.indexdata.dk/index/yaz"
+ name="ftp://ftp.indexdata.dk/index/yaz">

 
 The ES also use GNU's regex package to parse regular expressions. 
 The ES has been tested with regex-0.12. Some systems, such as Linux,
 
 The ES also use GNU's regex package to parse regular expressions. 
 The ES has been tested with regex-0.12. Some systems, such as Linux,

@@ -62,25 +62,26 @@ come with the regex package preinstalled.
 
 Unpack <tt>egate.tar.gz</tt> and edit the top level <tt/Makefile/. Specify
 where the GNU regex package is located and specify whether you use
 
 Unpack <tt>egate.tar.gz</tt> and edit the top level <tt/Makefile/. Specify
 where the GNU regex package is located and specify whether you use

-YAZ or Zdist. One some systems, you may have to set the <tt/NETLIB/ as
+YAZ or zdist. One some systems, you may have to set the <tt/NETLIB/ as

 well.
 
 The shell variables <tt/CC/ and <tt/CFLAGS/ are used by the
 <tt/Makefile/ so you may modify these before compiling.
 
 well.
 
 The shell variables <tt/CC/ and <tt/CFLAGS/ are used by the
 <tt/Makefile/ so you may modify these before compiling.
 

-Now, type <tt/make/. 
+Now, type <tt/make email/. 

 
 <sect>Installation
 
 <p>
 
 <sect>Installation
 
 <p>

-If the compilation succeeds, you should install the software.
-Edit the <tt/Makefile/ and set the LIBDIR to the installation
+If the compilation succeeds, you should install the software in some
+system location.
+Edit the <tt/Makefile/ and set EMAILLIBDIR to the installation

 directory. Since, the ES is executed by the mail system, and not by a
 user, this directory shouldn't be globally executable.
 
 directory. Since, the ES is executed by the mail system, and not by a
 user, this directory shouldn't be globally executable.
 

-When satisfied, type <tt/make install/.
+When satisfied, type <tt/make install.email/.

 
 

-Three executables are installed in LIBDIR:
+Three executables are installed in EMAILLIBDIR:

 <descrip>
 <tag/eti/ The email transport interface. This program receives
 incoming mail, identifies the user, and delivers the mail request
 <descrip>
 <tag/eti/ The email transport interface. This program receives
 incoming mail, identifies the user, and delivers the mail request

@@ -99,7 +100,7 @@ The <tt/sendmail/ or a similar program delivers the mail to the
 you create a special user and group for the ES software. In this case
 you should use <tt/chmod/ to and set the 'set user ID on execution'
 bits on the executable files and give that user read/write/execute
 you create a special user and group for the ES software. In this case
 you should use <tt/chmod/ to and set the 'set user ID on execution'
 bits on the executable files and give that user read/write/execute

-permissions in LIBDIR.
+permissions in EMAILLIBDIR.

 
 The mail system needs to know about the ES. Pick some name that serves
 as the ES user and edit <tt/aliases/ used by your mail system (usually 
 
 The mail system needs to know about the ES. Pick some name that serves
 as the ES user and edit <tt/aliases/ used by your mail system (usually 

@@ -107,7 +108,7 @@ as the ES user and edit <tt/aliases/ used by your mail system (usually
 
 <tt>es:"|/usr/local/lib/es/eti </tt><em>options</em><tt>"</tt>
 
 
 <tt>es:"|/usr/local/lib/es/eti </tt><em>options</em><tt>"</tt>
 

-In this example the mail user name is <tt/es/ and the LIBDIR is
+In this example the mail user name is <tt/es/ and the EMAILLIBDIR is

 <tt>/usr/local/lib/es</tt>.
 
 The ES system can operate with or without the monitor. When using
 <tt>/usr/local/lib/es</tt>.
 
 The ES system can operate with or without the monitor. When using