-## $Id: Makefile.am,v 1.2 2000-04-06 09:03:27 adam Exp $
+## $Id: Makefile.am,v 1.3 2000-10-11 12:31:27 adam Exp $
AUTOMAKE_OPTIONS=foreign
EXTRA_DIST= README CHANGELOG
if ISZMBOL
-SUBDIRS=util bfile dfa dict isams isamc isam rset recctrl tab index test
+SUBDIRS=util bfile dfa dict isams isamb isamc isam rset recctrl tab index test
else
SUBDIRS=util bfile dfa dict isams rset recctrl tab index test
endif
TCL_LIB = @TCL_LIB@
VERSION = @VERSION@
YAZINC = @YAZINC@
+YAZLALIB = @YAZLALIB@
YAZLIB = @YAZLIB@
+YAZVERSION = @YAZVERSION@
yazconfig = @yazconfig@
AUTOMAKE_OPTIONS = foreign
EXTRA_DIST = README CHANGELOG
-@ISZMBOL_TRUE@SUBDIRS = util bfile dfa dict isams isamc isam rset recctrl tab index test
+@ISZMBOL_TRUE@SUBDIRS = util bfile dfa dict isams isamb isamc isam rset recctrl tab index test
@ISZMBOL_FALSE@SUBDIRS = util bfile dfa dict isams rset recctrl tab index test
DIST_SUBDIRS = $(SUBDIRS) include doc
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
+@SET_MAKE@
+
all-recursive install-data-recursive install-exec-recursive \
installdirs-recursive install-recursive uninstall-recursive \
check-recursive installcheck-recursive info-recursive dvi-recursive:
@set fnord $(MAKEFLAGS); amf=$$2; \
dot_seen=no; \
rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = "."; then :; else \
- rev="$$subdir $$rev"; \
- fi; \
+ rev="$$subdir $$rev"; \
+ test "$$subdir" = "." && dot_seen=yes; \
done; \
- rev="$$rev ."; \
+ test "$$dot_seen" = "no" && rev=". $$rev"; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
$1_FALSE=
fi])
+# Use this m4 funciton for autoconf if you use YAZ in your own
+# configure script.
+# YAZ_INIT
+
+AC_DEFUN([YAZ_INIT],
+[
+ AC_SUBST(YAZLIB)
+ AC_SUBST(YAZLALIB)
+ AC_SUBST(YAZINC)
+ AC_SUBST(YAZVERSION)
+ yazconfig=NONE
+ yazpath=NONE
+ AC_ARG_WITH(yazconfig, [ --with-yazconfig=DIR yaz-config in DIR (example /home/yaz-1.7)], [yazpath=$withval])
+ if test "x$yazpath" != "xNONE"; then
+ yazconfig=$yazpath/yaz-config
+ else
+ for i in ../yaz* ../yaz; do
+ if test -d $i; then
+ if test -r $i/yaz-config; then
+ yazconfig=$i/yaz-config
+ fi
+ fi
+ done
+ if test "x$yazconfig" = "xNONE"; then
+ AC_PATH_PROG(yazconfig, yaz-config, NONE)
+ fi
+ fi
+ AC_MSG_CHECKING(for YAZ)
+ if $yazconfig --version >/dev/null 2>&1; then
+ YAZLIB=`$yazconfig --libs`
+ # if this is empty, it's a simple version YAZ 1.6 script
+ # so we have to source it instead...
+ if test "X$YAZLIB" = "X"; then
+ . $yazconfig
+ else
+ YAZLALIB=`$yazconfig --lalibs`
+ YAZINC=`$yazconfig --cflags`
+ YAZVERSION=`$yazconfig --version`
+ fi
+ AC_MSG_RESULT($yazconfig)
+ else
+ AC_MSG_RESULT(Not found)
+ YAZVERSION=NONE
+ fi
+])
+
+
TCL_LIB = @TCL_LIB@
VERSION = @VERSION@
YAZINC = @YAZINC@
+YAZLALIB = @YAZLALIB@
YAZLIB = @YAZLIB@
+YAZVERSION = @YAZVERSION@
yazconfig = @yazconfig@
noinst_LIBRARIES = libbfile.a
ac_default_prefix=/usr/local
# Any additions from configure.in:
ac_help="$ac_help
- --with-yazconfig=DIR yaz-config in DIR (example /home/yaz-1.5)"
+ --with-yazconfig=DIR yaz-config in DIR (example /home/yaz-1.7)"
ac_help="$ac_help
--disable-threads disable threads"
ac_help="$ac_help
SUBLIBS="../rset/librset.a \
../dict/libdict.a \
+ ../isamb/libisamb.a \
../isams/libisams.a \
../isam/libisam.a \
../isamc/libisamc.a \
missing_dir=`cd $ac_aux_dir && pwd`
echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:828: checking for working aclocal" >&5
+echo "configure:829: checking for working aclocal" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:841: checking for working autoconf" >&5
+echo "configure:842: checking for working autoconf" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:854: checking for working automake" >&5
+echo "configure:855: checking for working automake" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:867: checking for working autoheader" >&5
+echo "configure:868: checking for working autoheader" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:880: checking for working makeinfo" >&5
+echo "configure:881: checking for working makeinfo" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
mkdir ${srcdir}/isamc
touch ${srcdir}/isamc/Makefile.in
fi
+ if test ! -r ${srcdir}/isamb; then
+ mkdir ${srcdir}/isamb
+ touch ${srcdir}/isamb/Makefile.in
+ fi
fi
-
-
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:925: checking for $ac_word" >&5
+echo "configure:928: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:955: checking for $ac_word" >&5
+echo "configure:958: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1006: checking for $ac_word" >&5
+echo "configure:1009: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1038: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1041: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 1049 "configure"
+#line 1052 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1054: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1057: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1080: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1083: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1085: checking whether we are using GNU C" >&5
+echo "configure:1088: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1094: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1097: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1113: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1116: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1145: checking how to run the C preprocessor" >&5
+echo "configure:1148: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 1160 "configure"
+#line 1163 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1166: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1169: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 1177 "configure"
+#line 1180 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1183: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1186: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 1194 "configure"
+#line 1197 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1200: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1203: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1236: checking for a BSD compatible install" >&5
+echo "configure:1239: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1291: checking for $ac_word" >&5
+echo "configure:1294: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
-yazconfig=NONE
-yazpath=NONE
-# Check whether --with-yazconfig or --without-yazconfig was given.
+
+
+
+
+
+
+ yazconfig=NONE
+ yazpath=NONE
+ # Check whether --with-yazconfig or --without-yazconfig was given.
if test "${with_yazconfig+set}" = set; then
withval="$with_yazconfig"
yazpath=$withval
fi
-if test "x$yazpath" != "xNONE"; then
- yazconfig=$yazpath/yaz-config
-else
- for i in ../yaz* ../yaz; do
- if test -d $i; then
- if test -r $i/yaz-config; then
- yazconfig=$i/yaz-config
+ if test "x$yazpath" != "xNONE"; then
+ yazconfig=$yazpath/yaz-config
+ else
+ for i in ../yaz* ../yaz; do
+ if test -d $i; then
+ if test -r $i/yaz-config; then
+ yazconfig=$i/yaz-config
+ fi
fi
- fi
- done
- if test "x$yazconfig" = "xNONE"; then
- # Extract the first word of "yaz-config", so it can be a program name with args.
+ done
+ if test "x$yazconfig" = "xNONE"; then
+ # Extract the first word of "yaz-config", so it can be a program name with args.
set dummy yaz-config; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1340: checking for $ac_word" >&5
+echo "configure:1349: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_yazconfig'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
+ fi
fi
-fi
-echo $ac_n "checking for YAZ""... $ac_c" 1>&6
-echo "configure:1376: checking for YAZ" >&5
-if test -r $yazconfig; then
- . $yazconfig
- echo "$ac_t""$yazconfig" 1>&6
-else
- echo "$ac_t""Not found" 1>&6
-fi
+ echo $ac_n "checking for YAZ""... $ac_c" 1>&6
+echo "configure:1385: checking for YAZ" >&5
+ if $yazconfig --version >/dev/null 2>&1; then
+ YAZLIB=`$yazconfig --libs`
+ YAZLALIB=`$yazconfig --lalibs`
+ YAZINC=`$yazconfig --cflags`
+ YAZVERSION=`$yazconfig --version`
+ echo "$ac_t""$yazconfig" 1>&6
+ else
+ echo "$ac_t""Not found" 1>&6
+ YAZVERSION=NONE
+ fi
+
+
# Check whether --enable-threads or --disable-threads was given.
if test "${enable_threads+set}" = set; then
enableval="$enable_threads"
if test "$enable_threads" = "yes"; then
echo $ac_n "checking for main in -lpthread""... $ac_c" 1>&6
-echo "configure:1393: checking for main in -lpthread" >&5
+echo "configure:1408: checking for main in -lpthread" >&5
ac_lib_var=`echo pthread'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lpthread $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 1401 "configure"
+#line 1416 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:1408: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1423: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for working POSIX Threads""... $ac_c" 1>&6
-echo "configure:1436: checking for working POSIX Threads" >&5
+echo "configure:1451: checking for working POSIX Threads" >&5
cat > conftest.$ac_ext <<EOF
-#line 1438 "configure"
+#line 1453 "configure"
#include "confdefs.h"
#include <pthread.h>
int func(void *p) { return 0; }
int r = pthread_create (&pthread_id, 0, func, 0);
; return 0; }
EOF
-if { (eval echo configure:1449: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1464: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
thread_ok=yes
else
# Extract the first word of "tclsh", so it can be a program name with args.
set dummy tclsh; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1489: checking for $ac_word" >&5
+echo "configure:1504: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_TCLSH'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
prefix=${saveprefix}
fi
echo $ac_n "checking for Tcl""... $ac_c" 1>&6
-echo "configure:1530: checking for Tcl" >&5
+echo "configure:1545: checking for Tcl" >&5
if test -r ${tclconfig}/tclConfig.sh; then
. ${tclconfig}/tclConfig.sh
if test -r ${tclconfig}/../generic/tcl.h; then
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1560: checking for $ac_hdr" >&5
+echo "configure:1575: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1565 "configure"
+#line 1580 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1570: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1585: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
done
echo $ac_n "checking for bzCompressInit in -lbz2""... $ac_c" 1>&6
-echo "configure:1597: checking for bzCompressInit in -lbz2" >&5
+echo "configure:1612: checking for bzCompressInit in -lbz2" >&5
ac_lib_var=`echo bz2'_'bzCompressInit | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lbz2 $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 1605 "configure"
+#line 1620 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
bzCompressInit()
; return 0; }
EOF
-if { (eval echo configure:1616: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1631: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1648: checking for $ac_hdr" >&5
+echo "configure:1663: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1653 "configure"
+#line 1668 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1658: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1673: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
fi
echo $ac_n "checking for LFS""... $ac_c" 1>&6
-echo "configure:1686: checking for LFS" >&5
+echo "configure:1701: checking for LFS" >&5
if test "$cross_compiling" = yes; then
bits=32
else
cat > conftest.$ac_ext <<EOF
-#line 1691 "configure"
+#line 1706 "configure"
#include "confdefs.h"
#define _FILE_OFFSET_BITS 64
#include <unistd.h>
}
EOF
-if { (eval echo configure:1711: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1726: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
bits=64
else
echo "$ac_t""no" 1>&6
fi
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:1733: checking for ANSI C header files" >&5
+echo "configure:1748: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1738 "configure"
+#line 1753 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1746: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1761: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 1763 "configure"
+#line 1778 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 1781 "configure"
+#line 1796 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 1802 "configure"
+#line 1817 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:1813: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1828: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
bfile/Makefile
dfa/Makefile
dict/Makefile
+ isamb/Makefile
isams/Makefile
isamc/Makefile
isam/Makefile
s%@SUBLIBS@%$SUBLIBS%g
s%@TCL_INCLUDE@%$TCL_INCLUDE%g
s%@TCL_LIB@%$TCL_LIB%g
-s%@YAZLIB@%$YAZLIB%g
-s%@YAZINC@%$YAZINC%g
s%@PROGPREFIX@%$PROGPREFIX%g
s%@CC@%$CC%g
s%@CPP@%$CPP%g
s%@RANLIB@%$RANLIB%g
+s%@YAZLIB@%$YAZLIB%g
+s%@YAZLALIB@%$YAZLALIB%g
+s%@YAZINC@%$YAZINC%g
+s%@YAZVERSION@%$YAZVERSION%g
s%@yazconfig@%$yazconfig%g
s%@TCLSH@%$TCLSH%g
bfile/Makefile
dfa/Makefile
dict/Makefile
+ isamb/Makefile
isams/Makefile
isamc/Makefile
isam/Makefile
dnl Zebra, Index Data Aps, 1994-2000
-dnl $Id: configure.in,v 1.22 2000-07-07 12:49:20 adam Exp $
+dnl $Id: configure.in,v 1.23 2000-10-11 12:31:27 adam Exp $
dnl
AC_INIT(include/zebraver.h)
AC_MSG_CHECKING(for package)
AM_INIT_AUTOMAKE(zmbol,1.1)
SUBLIBS="../rset/librset.a \
../dict/libdict.a \
+ ../isamb/libisamb.a \
../isams/libisams.a \
../isam/libisam.a \
../isamc/libisamc.a \
mkdir ${srcdir}/isamc
touch ${srcdir}/isamc/Makefile.in
fi
+ if test ! -r ${srcdir}/isamb; then
+ mkdir ${srcdir}/isamb
+ touch ${srcdir}/isamb/Makefile.in
+ fi
fi
AM_CONDITIONAL(ISZMBOL,test $PACKAGE = zmbol)
dnl ------ Substitutions
AC_SUBST(DEFS)
AC_SUBST(TCL_INCLUDE)
AC_SUBST(TCL_LIB)
-AC_SUBST(YAZLIB)
-AC_SUBST(YAZINC)
AC_SUBST(PROGPREFIX)
dnl
dnl ------ Checking programs
AC_PROG_CPP
AC_PROG_INSTALL
AC_PROG_RANLIB
-dnl
-dnl ------ Look for Yaz
-dnl See if user specified location of yaz-config; otherwise
-dnl use ../yaz if is a directory (internal development); otherwise
-dnl use yaz-config found in PATH.
-yazconfig=NONE
-yazpath=NONE
-AC_ARG_WITH(yazconfig, [ --with-yazconfig=DIR yaz-config in DIR (example /home/yaz-1.5)], [yazpath=$withval])
-if test "x$yazpath" != "xNONE"; then
- yazconfig=$yazpath/yaz-config
-else
- for i in ../yaz* ../yaz; do
- if test -d $i; then
- if test -r $i/yaz-config; then
- yazconfig=$i/yaz-config
- fi
- fi
- done
- if test "x$yazconfig" = "xNONE"; then
- AC_PATH_PROG(yazconfig, yaz-config, NONE)
- fi
-fi
-AC_MSG_CHECKING(for YAZ)
-if test -r $yazconfig; then
- . $yazconfig
- AC_MSG_RESULT($yazconfig)
-else
- AC_MSG_RESULT(Not found)
-fi
-dnl
+
+YAZ_INIT
+
dnl ------ Threads
AC_ARG_ENABLE(threads, [ --disable-threads disable threads],[enable_threads=$enableval],[enable_threads=yes])
if test "$enable_threads" = "yes"; then
bfile/Makefile
dfa/Makefile
dict/Makefile
+ isamb/Makefile
isams/Makefile
isamc/Makefile
isam/Makefile
TCL_LIB = @TCL_LIB@
VERSION = @VERSION@
YAZINC = @YAZINC@
+YAZLALIB = @YAZLALIB@
YAZLIB = @YAZLIB@
+YAZVERSION = @YAZVERSION@
yazconfig = @yazconfig@
noinst_LIBRARIES = libdfa.a
TCL_LIB = @TCL_LIB@
VERSION = @VERSION@
YAZINC = @YAZINC@
+YAZLALIB = @YAZLALIB@
YAZLIB = @YAZLIB@
+YAZVERSION = @YAZVERSION@
yazconfig = @yazconfig@
noinst_LIBRARIES = libdict.a
TCL_LIB = @TCL_LIB@
VERSION = @VERSION@
YAZINC = @YAZINC@
+YAZLALIB = @YAZLALIB@
YAZLIB = @YAZLIB@
+YAZVERSION = @YAZVERSION@
yazconfig = @yazconfig@
docdir = $(pkgdatadir)/doc
TCL_LIB = @TCL_LIB@
VERSION = @VERSION@
YAZINC = @YAZINC@
+YAZLALIB = @YAZLALIB@
YAZLIB = @YAZLIB@
+YAZVERSION = @YAZVERSION@
yazconfig = @yazconfig@
EXTRA_DIST = bfile.h bset.h charmap.h dfa.h dict.h direntz.h isam.h isamc.h isamd.h isams.h mfile.h passwddb.h recctrl.h res.h rsbool.h rset.h rsisam.h rsisamc.h rsisams.h rsm_or.h rsnull.h rstemp.h set.h sortidx.h str.h zebra-lock.h zebramap.h zebrautl.h zebraver.h
TCL_LIB = @TCL_LIB@
VERSION = @VERSION@
YAZINC = @YAZINC@
+YAZLALIB = @YAZLALIB@
YAZLIB = @YAZLIB@
+YAZVERSION = @YAZVERSION@
yazconfig = @yazconfig@
noinst_PROGRAMS = apitest
TCL_LIB = @TCL_LIB@
VERSION = @VERSION@
YAZINC = @YAZINC@
+YAZLALIB = @YAZLALIB@
YAZLIB = @YAZLIB@
+YAZVERSION = @YAZVERSION@
yazconfig = @yazconfig@
noinst_LIBRARIES = libisam.a
--- /dev/null
+## $Id: Makefile.am,v 1.1 2000-10-11 12:31:27 adam Exp $
+
+noinst_LIBRARIES = libisamb.a
+
+libisamb_a_SOURCES = isamb.c
+
+INCLUDES = -I$(srcdir)/../include @YAZINC@
+
+LDADD = ../util/libutil.a ../bfile/libbfile.a libisamc.a @YAZLIB@
--- /dev/null
+# Makefile.in generated automatically by automake 1.4 from Makefile.am
+
+# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+
+DESTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+
+top_builddir = ..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+CC = @CC@
+CPP = @CPP@
+DEFS = @DEFS@
+MAKEINFO = @MAKEINFO@
+PACKAGE = @PACKAGE@
+PROGPREFIX = @PROGPREFIX@
+RANLIB = @RANLIB@
+SUBLIBS = @SUBLIBS@
+TCL_INCLUDE = @TCL_INCLUDE@
+TCL_LIB = @TCL_LIB@
+VERSION = @VERSION@
+YAZINC = @YAZINC@
+YAZLALIB = @YAZLALIB@
+YAZLIB = @YAZLIB@
+YAZVERSION = @YAZVERSION@
+yazconfig = @yazconfig@
+
+noinst_LIBRARIES = libisamb.a
+
+libisamb_a_SOURCES = isamb.c
+
+INCLUDES = -I$(srcdir)/../include @YAZINC@
+
+LDADD = ../util/libutil.a ../bfile/libbfile.a libisamc.a @YAZLIB@
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_CLEAN_FILES =
+LIBRARIES = $(noinst_LIBRARIES)
+
+CPPFLAGS = @CPPFLAGS@
+LDFLAGS = @LDFLAGS@
+LIBS = @LIBS@
+libisamb_a_LIBADD =
+libisamb_a_OBJECTS = isamb.o
+AR = ar
+CFLAGS = @CFLAGS@
+COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
+DIST_COMMON = Makefile.am Makefile.in
+
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = gtar
+GZIP_ENV = --best
+DEP_FILES = .deps/isamb.P
+SOURCES = $(libisamb_a_SOURCES)
+OBJECTS = $(libisamb_a_OBJECTS)
+
+all: all-redirect
+.SUFFIXES:
+.SUFFIXES: .S .c .o .s
+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+ cd $(top_srcdir) && $(AUTOMAKE) --gnu isamb/Makefile
+
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
+ cd $(top_builddir) \
+ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+
+mostlyclean-noinstLIBRARIES:
+
+clean-noinstLIBRARIES:
+ -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
+
+distclean-noinstLIBRARIES:
+
+maintainer-clean-noinstLIBRARIES:
+
+.s.o:
+ $(COMPILE) -c $<
+
+.S.o:
+ $(COMPILE) -c $<
+
+mostlyclean-compile:
+ -rm -f *.o core *.core
+
+clean-compile:
+
+distclean-compile:
+ -rm -f *.tab.c
+
+maintainer-clean-compile:
+
+libisamb.a: $(libisamb_a_OBJECTS) $(libisamb_a_DEPENDENCIES)
+ -rm -f libisamb.a
+ $(AR) cru libisamb.a $(libisamb_a_OBJECTS) $(libisamb_a_LIBADD)
+ $(RANLIB) libisamb.a
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS)'; \
+ unique=`for i in $$list; do echo $$i; done | \
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ here=`pwd` && cd $(srcdir) \
+ && mkid -f$$here/ID $$unique $(LISP)
+
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS)'; \
+ unique=`for i in $$list; do echo $$i; done | \
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+ || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
+
+mostlyclean-tags:
+
+clean-tags:
+
+distclean-tags:
+ -rm -f TAGS ID
+
+maintainer-clean-tags:
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+
+subdir = isamb
+
+distdir: $(DISTFILES)
+ here=`cd $(top_builddir) && pwd`; \
+ top_distdir=`cd $(top_distdir) && pwd`; \
+ distdir=`cd $(distdir) && pwd`; \
+ cd $(top_srcdir) \
+ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu isamb/Makefile
+ @for file in $(DISTFILES); do \
+ d=$(srcdir); \
+ if test -d $$d/$$file; then \
+ cp -pr $$/$$file $(distdir)/$$file; \
+ else \
+ test -f $(distdir)/$$file \
+ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+ || cp -p $$d/$$file $(distdir)/$$file || :; \
+ fi; \
+ done
+
+DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
+
+-include $(DEP_FILES)
+
+mostlyclean-depend:
+
+clean-depend:
+
+distclean-depend:
+ -rm -rf .deps
+
+maintainer-clean-depend:
+
+%.o: %.c
+ @echo '$(COMPILE) -c $<'; \
+ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
+ @-cp .deps/$(*F).pp .deps/$(*F).P; \
+ tr ' ' '\012' < .deps/$(*F).pp \
+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
+ >> .deps/$(*F).P; \
+ rm .deps/$(*F).pp
+
+%.lo: %.c
+ @echo '$(LTCOMPILE) -c $<'; \
+ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
+ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
+ < .deps/$(*F).pp > .deps/$(*F).P; \
+ tr ' ' '\012' < .deps/$(*F).pp \
+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
+ >> .deps/$(*F).P; \
+ rm -f .deps/$(*F).pp
+info-am:
+info: info-am
+dvi-am:
+dvi: dvi-am
+check-am: all-am
+check: check-am
+installcheck-am:
+installcheck: installcheck-am
+install-exec-am:
+install-exec: install-exec-am
+
+install-data-am:
+install-data: install-data-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-am
+uninstall-am:
+uninstall: uninstall-am
+all-am: Makefile $(LIBRARIES)
+all-redirect: all-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
+installdirs:
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -rm -f Makefile $(CONFIG_CLEAN_FILES)
+ -rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean-am: mostlyclean-noinstLIBRARIES mostlyclean-compile \
+ mostlyclean-tags mostlyclean-depend mostlyclean-generic
+
+mostlyclean: mostlyclean-am
+
+clean-am: clean-noinstLIBRARIES clean-compile clean-tags clean-depend \
+ clean-generic mostlyclean-am
+
+clean: clean-am
+
+distclean-am: distclean-noinstLIBRARIES distclean-compile \
+ distclean-tags distclean-depend distclean-generic \
+ clean-am
+
+distclean: distclean-am
+
+maintainer-clean-am: maintainer-clean-noinstLIBRARIES \
+ maintainer-clean-compile maintainer-clean-tags \
+ maintainer-clean-depend maintainer-clean-generic \
+ distclean-am
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-am
+
+.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
+clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
+mostlyclean-compile distclean-compile clean-compile \
+maintainer-clean-compile tags mostlyclean-tags distclean-tags \
+clean-tags maintainer-clean-tags distdir mostlyclean-depend \
+distclean-depend clean-depend maintainer-clean-depend info-am info \
+dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
+install-exec install-data-am install-data install-am install \
+uninstall-am uninstall all-redirect all-am all installdirs \
+mostlyclean-generic distclean-generic clean-generic \
+maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
--- /dev/null
+#if 0
+#include <isamb.h>
+
+ISAMB isamb_open (const char *name, ISAMC_M method)
+{
+ ISAMB isamb = xmalloc (sizeof(*isamb));
+ return isamb;
+}
+
+int isamb_insert (ISAMB is, ISAMB_pos *pos, const void *data)
+{
+ void *decodeClientData;
+
+ void *page;
+ if (*pos == 0)
+ {
+ *pos = isamb_alloc_block (is, isamb->block_size[0], &page);
+ isamb_page_set_leaf (page);
+ isamb_page_set_no (page, 0);
+ }
+ else /* find leaf ... */
+ {
+ const char *src;
+ char dst[200];
+ int no, i;
+ while (1)
+ {
+ ISAMB_pos subptr;
+
+ isamb_get_block (is, *pos, &page);
+ if (isamb_page_isleaf (page))
+ break;
+ src = isamb_page_datalist (page);
+ no = isamb_page_get_no (page);
+ decodeClientData = (*is->method->code_start)(ISAMC_DECODE);
+
+ isamb_read_subptr (&subptr, &src);
+ for (i = 0; i<no; i++)
+ {
+ const char *src0 = src;
+
+ (*is->method->code_item)(ISAMC_DECODE, decodeClientData,
+ dst, &src);
+ if ((*is->method->compare_item)(data, dst) < 0)
+ break;
+
+ isamb_read_subptr (&subptr, src);
+ }
+ *pos = subptr;
+ (*is->method->code_stop)(ISAMC_DECODE, decodeClientData);
+ }
+ src = isamb_page_datalist (page);
+ no = isamb_page_get_no (page);
+ decodeClientData = (*is->method->code_start)(ISAMC_DECODE);
+ diff = -1;
+ for (i = 0; i<no; i++)
+ {
+ int diff;
+ (*is->method->code_item)(ISAMC_DECODE, decodeClientData,
+ dst, &src);
+ diff = (*is->method->compare_item)(data, dst);
+ if (diff <= 0)
+ break;
+ }
+ if (diff < 0)
+ {
+ int j;
+ src = isamb_page_datalist (page);
+ page2 = isamb_page_dup (is, page);
+ dst2 = isamb_page_datalist (page2);
+ src2 = data;
+ for (j = 0; j <= no; j++)
+ {
+ if ( i == j)
+ (*is->method->code_item)(ISAMC_ENCODE, encodeClientData,
+ &dst2, &src2);
+ if (j < no)
+ {
+ char *dst0 = dst;
+ (*is->method->code_item)(ISAMC_DECODE, decodeClientData,
+ &dst, &src);
+ (*is->method->code_item)(ISAMC_ENCODE, encodeClientData,
+ &dst2, &dst0);
+ }
+ }
+ }
+ }
+}
+#endif
TCL_LIB = @TCL_LIB@
VERSION = @VERSION@
YAZINC = @YAZINC@
+YAZLALIB = @YAZLALIB@
YAZLIB = @YAZLIB@
+YAZVERSION = @YAZVERSION@
yazconfig = @yazconfig@
noinst_LIBRARIES = libisamc.a
TCL_LIB = @TCL_LIB@
VERSION = @VERSION@
YAZINC = @YAZINC@
+YAZLALIB = @YAZLALIB@
YAZLIB = @YAZLIB@
+YAZVERSION = @YAZVERSION@
yazconfig = @yazconfig@
noinst_LIBRARIES = libisams.a
TCL_LIB = @TCL_LIB@
VERSION = @VERSION@
YAZINC = @YAZINC@
+YAZLALIB = @YAZLALIB@
YAZLIB = @YAZLIB@
+YAZVERSION = @YAZVERSION@
yazconfig = @yazconfig@
noinst_LIBRARIES = librecctrl.a
TCL_LIB = @TCL_LIB@
VERSION = @VERSION@
YAZINC = @YAZINC@
+YAZLALIB = @YAZLALIB@
YAZLIB = @YAZLIB@
+YAZVERSION = @YAZVERSION@
yazconfig = @yazconfig@
noinst_LIBRARIES = librset.a
TCL_LIB = @TCL_LIB@
VERSION = @VERSION@
YAZINC = @YAZINC@
+YAZLALIB = @YAZLALIB@
YAZLIB = @YAZLIB@
+YAZVERSION = @YAZVERSION@
yazconfig = @yazconfig@
tabdatadir = $(pkgdatadir)/tab
TCL_LIB = @TCL_LIB@
VERSION = @VERSION@
YAZINC = @YAZINC@
+YAZLALIB = @YAZLALIB@
YAZLIB = @YAZLIB@
+YAZVERSION = @YAZVERSION@
yazconfig = @yazconfig@
SUBDIRS = gils usmarc
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
+@SET_MAKE@
+
all-recursive install-data-recursive install-exec-recursive \
installdirs-recursive install-recursive uninstall-recursive \
check-recursive installcheck-recursive info-recursive dvi-recursive:
@set fnord $(MAKEFLAGS); amf=$$2; \
dot_seen=no; \
rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
- if test "$$subdir" = "."; then :; else \
- rev="$$subdir $$rev"; \
- fi; \
+ rev="$$subdir $$rev"; \
+ test "$$subdir" = "." && dot_seen=yes; \
done; \
- rev="$$rev ."; \
+ test "$$dot_seen" = "no" && rev=". $$rev"; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
TCL_LIB = @TCL_LIB@
VERSION = @VERSION@
YAZINC = @YAZINC@
+YAZLALIB = @YAZLALIB@
YAZLIB = @YAZLIB@
+YAZVERSION = @YAZVERSION@
yazconfig = @yazconfig@
EXTRA_DIST = zebra.cfg test.sh
TCL_LIB = @TCL_LIB@
VERSION = @VERSION@
YAZINC = @YAZINC@
+YAZLALIB = @YAZLALIB@
YAZLIB = @YAZLIB@
+YAZVERSION = @YAZVERSION@
yazconfig = @yazconfig@
EXTRA_DIST = zebra.cfg test.sh
TCL_LIB = @TCL_LIB@
VERSION = @VERSION@
YAZINC = @YAZINC@
+YAZLALIB = @YAZLALIB@
YAZLIB = @YAZLIB@
+YAZVERSION = @YAZVERSION@
yazconfig = @yazconfig@
noinst_LIBRARIES = libutil.a
projects / idzebra-moved-to-github.git / commitdiff